Bedienungsanleitung Canon EOS C300 (Seite 34 von 200) (Englisch)

543070

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

Preparing the Camcorder

# Peripheral Illumination Correction

Depending on the characteristics of the lens used, the image around the corners of the picture may seem darker

due to light fall-off or peripheral illumination drop. If the camcorder has correction data available for the EF lens

used, it can apply this correction data to compensate as necessary.

1 Attach the lens you want to use.

2 Open the peripheral illumination correction screen.

[~ Camera Setup] > [Periph. Illum. Corr.]

• If correction data is available, the lens model name will appear on the

screen.

• If correction data is not available, [Periph. Illum. Corr.] will appear

grayed out. Visit your local Canon Web site and check if there is

correction data available for the lens you are using. If so, download the necessary update package and

upgrade the camcorder’s firmware following the instructions supplied therein.

3 Select [On] and then press SET.

•As long as [~ Camera Setup] > [Periph. Illum. Corr.] is set to [On], the camcorder will automatically apply

the appropriate correction data.

NOTES

• About lens correction data:

- The camcorder contains a register of correction data for compatible lenses that were available at the time

the camcorder went on sale. Correction data for future lenses will be made available as part of the regular

updates released for the camcorder’s firmware. For more details, visit your local Canon Web site.

- Depending on the recording conditions, noise may appear in the periphery of the image as a result of the

correction.

- The level of correction will be lower for lenses that cannot provide distance information.

Operating modes:

Changing a Lens While Maintaining the Time Code’s Progress

If you set an assignable button to [LENS EXCHANGE] (A 111), you can press

the button to change the lens while the camcorder is turned on and the time

code is running.

1 Set an assignable button to [LENS EXCHANGE] (A 111).

2 Press and hold the assignable button for 1 second.

• The camcorder enters lens exchange mode and the tally lamp will flash

twice every 2 seconds. During this time, the time code will continue

running.

• While the camcorder is in lens exchange mode, only the Q switch

and the selected assignable button can be operated. Also, the LCD screen will turn off and output from

the video terminals will be put on hold.

3 Remove the lens attached to the camcorder and attach the new lens.

• Do not set the Q switch to OFF.

4 Press the assignable button again.

• The camcorder exits lens exchange mode.

• Opening a CF card slot cover or removing the SD card will also cause the camcorder to exit lens

exchange mode.

Operating modes:

[~ Camera Setup]

[Periph. Illum. Corr.]

[Off]

COPY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C300 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info