Bedienungsanleitung Canon EOS C500PL (Seite 12 von 212) (Englisch)

543073

Zoom out

Zoom in

Vorherige Seite

1/212

Nächste Seite

About this Manual

Setting the Time Code

While recording, the camera can generate a time code signal and embed it in your recordings. You can have the

camera output the time code signal from the 3G-SDI terminals, MON. terminals, HD/SD SDI terminal or TIME

CODE terminal (A 91). In addition, you can superimpose the time code on video output from the HDMI OUT

terminal or SYNC OUT terminal. While playing back video recorded on a CF card, you can output the time code

on the CF card from the HD/SD SDI terminal or TIME CODE terminal. Additionally, you can superimpose the time

code on the picture from the HDMI OUT terminal or SYNC OUT terminal. For recordings with a frame rate of

29.97P, 59.94i or 59.94P, you can also select between a drop frame and non-drop frame time code.

To synchronize the camera s time code to an external time code generator, refer to

Synchronizing with an

External Device

(A 88).

Selecting the Running Mode

During MXF mode, you can select the running mode of the camera s time

code. During 4K and 2K modes, the running mode will be set to [Free

Run] during normal shooting and slow & fast recording mode; it will be set

to [Rec Run] during interval recording and frame recording modes. You

can set the time code s initial value, however, by performing the procedure

in the following section

Setting the Time Code s Initial Value

1 Open the time code [Mode] submenu.

[¤ TC/UB Setup] >> [Time Code] > [Mode]

2 Select the desired option and then press SET.

€ If you selected [Regen.], you do not need to perform the rest of this

procedure. If you selected [Preset] and would like to set the time

code s initial value, see the following section

Setting the Time Code s

Initial Value

3 After you select [Preset], open the time code [Run] submenu.

[¤ TC/UB Setup] > [Time Code] > [Run]

4 Select the desired option and then press SET.

Options

Operating modes:

[Preset]: The time code starts from an initial value you can select in

advance. The default initial time code is 00:00:00.00. The time

code s running mode depends on the [Run] setting.

[Rec Run]: The time code runs only while recording so clips

recorded consecutively on the same CF card will have

continuous time codes.

[Free Run]:The time code starts running the moment you press

SET to select this option and keeps running regardless

of the camera s operation.

[Regen.]: The camera will read the selected CF card and the time code will

continue from the last recorded time code on the CF card. The

time code runs only while recording so clips recorded

consecutively on the same CF card will have continuous time

codes.

[¤ TC/UB Setup]

[Time Code]

[Mode]

[Preset]

[¤ TC/UB Setup]

[Time Code]

[Run]

[Free Run]

Operating modes

indicates that a function is available in the

operating mode (the two icons left of the dividing bar)

and system priority (the three icons to the right of the

dividing bar) indicated and indicates that the

function is not available. For a detailed explanation,

refer to

Turning the C a mera O n and Off

(A 26) and

Selecting the System Priority

(A 60, 64).

When a function requires the use of the menu,

the quick reference shows the submenus and,

when applicable, the default setting for the menu

item. The example illustration indicates that you

can find the function by selecting the [¤ TC/

UB Setup] menu and then the [Time Code]

menu item.

The arrow is used to abbreviate menu

selections. For a detailed explanation on

how to use the menus, refer to

Using the

Menus

(A 29). For a concise summary

of all available menu options and

settings, refer to the appendix

Options

(A 169).

When a procedure requires selecting an option,

the available options are listed within or after the

procedure. Brackets [ ] are used to refer to menu

options as they are displayed on screen.

COPY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C500PL Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C500PL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info