Bedienungsanleitung Canon EOS C500PL (Seite 34 von 212) (Englisch)

543073

Zoom out

Zoom in

Vorherige Seite

1/212

Nächste Seite

Preparing the Camera

2 Peripheral Illumination Correction

Depending on the characteristics of the lens used, the image around the corners of the picture may seem darker

due to light fall-off or peripheral illumination drop. If the camera has correction data available for the EF lens used,

it can apply this correction data to compensate as necessary.

1 Attach the lens you want to use.

2 Open the peripheral illumination correction screen.

[~ Camera Setup] > [Periph. Illum. Corr.]

• If correction data is available, the lens model name will appear on the

screen.

• If correction data is not available, [Periph. Illum. Corr.] will appear

grayed out. Visit your local Canon Web site and check if there is

correction data available for the lens you are using. If so, download the necessary update package and

upgrade the camera’s firmware following the instructions supplied therein.

3 Select [On] and then press SET.

•As long as [~ Camera Setup] > [Periph. Illum. Corr.] is set to [On], the camera will automatically apply the

appropriate correction data.

NOTES

• About lens correction data:

- The camera contains a register of correction data for compatible lenses that were available at the time the

camera went on sale. Correction data for future lenses will be made available as part of the regular updates

released for the camera’s firmware. For more details, visit your local Canon Web site.

- Depending on the recording conditions, noise may appear in the periphery of the image as a result of the

correction.

- The level of correction will be lower for lenses that cannot provide distance information.

- The level of correction will be lower the higher the ISO speed/gain setting used.

- No correction will be applied when correction data is not available for the lens attached.

- When using EF-S lenses, peripheral illumination fall-off may be more pronounced.

Operating modes:

Changing a Lens While Maintaining the Time Code’s Progress

You can change the lens while the camera is turned on and the time

code is running.

1 Press and hold the LENS EXCHANGE button for 1 second.

• The camera enters lens exchange mode and the tally lamp will

flash twice every 2 seconds. During this time, the time code will

continue running.

• While the camera is in lens exchange mode, only the Q

switch and LENS EXCHANGE button can be operated. Also, the LCD screen will turn off and output from

the video terminals will be put on hold.

2 Remove the lens attached to the camera and attach the new lens.

• Do not set the Q switch to OFF.

3 Press the LENS EXCHANGE button again.

• The camera exits lens exchange mode.

• Opening the CF card slot cover or removing the SD card will also exit lens exchange mode.

Operating modes:

[~ Camera Setup]

[Periph. Illum. Corr.]

[Off]

COPY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C500PL Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C500PL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info