Bedienungsanleitung Canon EOS C500PL (Seite 37 von 212) (Englisch)

543073

Zoom out

Zoom in

Vorherige Seite

1/212

Nächste Seite

Preparing the Camera

Attaching the Viewfinder Cap

Pointing the viewfinder lens at the sun or other strong light sources

may cause damage to internal components. When you are not using

the viewfinder, make sure to attach the viewfinder cap to the

viewfinder. This will also protect the viewfinder from scratches and

dirt. Attach the viewfinder cap by inserting it into the rubber portion of

the viewfinder unit.

Using the LCD Panel

The whole monitor unit can be rotated 270º sideways allowing for

easy monitoring and operation from the side of the camera.

Additionally, the independently articulated LCD panel can be rotated

180º sideways and 270º up and down. In combination, you can

position the LCD panel at a comfortable angle whatever the shooting

style you need.

1 Rotate the monitor unit sideways to the desired angle.

2 Open the LCD panel and adjust the screen to the desired

position.

Adjusting the LCD Panel for Shoulder Mounted Use

1 Open the LCD panel 90º until it is perpendicular to the monitor unit.

2 Rotate the LCD panel 180º left.

3 Rotate the LCD panel 180º forward.

4 Press the MIRROR button until the image is displayed in the correct

orientation.

• Repeatedly pressing the MIRROR button will change the

displayed image in the following order: Image inverted

horizontally ´ Image inverted horizontally and vertically ´ Image

inverted vertically ´ Original image.

NOTES

• About the LCD and viewfinder screens: The screens are produced using extremely high-precision manufacturing

techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may

occasionally misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and

does not constitute a malfunction.

• You can set the LCD screen to black & white (A 38).

• When you use a commercially available lens adapter and the image on the screen is inverted, you can use the

[w Other Functions] > [Custom Function] > [Scan Reverse Rec] setting to return the image to the correct

orientation. You can record this corrected image or have the camera output it from the 3G-SDI terminal, MON.

terminal, HD/SD SD terminalI or HDMI OUT terminal.

• If you are not interested in using the viewfinder while the monitor unit is attached, you can set [£ LCD/VF

Setup] > [LCD/VF Simul.] to [Off] to conserve the camera’s power. Even when [LCD/VF Simul.] is set to [Off],

closing the LCD panel will automatically activate the viewfinder.

• While recording with the LCD panel rotated in a different direction or angle (for example, facing toward the

subject), you can press the MIRROR button repeatedly to invert the image on the screen horizontally, vertically

or both ways.

You can use the viewfinder and watch

the LCD screen at the same time

COPY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C500PL Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C500PL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info