Bedienungsanleitung Canon EOS C500PL (Seite 58 von 212) (Englisch)

543073

Zoom out

Zoom in

Vorherige Seite

1/212

Nächste Seite

Recording Video

Canon Log Gamma and CINEMA Preset

The Canon Log gamma setting makes full use of the newly developed image sensor to offer spectacular

dynamic range.

You can easily set the camcorder to use a number of preset picture-

related settings especially designed with professional cinematography

and motion picture production in mind. With the CINEMA preset settings,

the gamma and color matrix (A 117) will be set to the advanced Canon

Log setting, which makes full use of the newly developed image sensor to

offer spectacular dynamic range. On the other hand, other custom picture

settings will not be available.

Clips recorded using Canon Log gamma need to be processed in post-production. During post-production, you

can apply a LUT (lookup table) to clips recorded using Canon Log gamma to view the clips with more natural

colors. For details about available LUTs, visit your local Canon Web site.

* You can also apply a LUT to the MON. terminal or HD/SD SDI terminal output.

Setting CINEMA Preset

1Open the [/ CINEMA Locked] submenu.

[~ Camera Setup] > [/ CINEMA Locked]

2 Select [On] and then press SET.

• All picture-related settings will be set according to the CINEMA preset values. As such, you will not be able

to adjust custom picture settings.

•[/ LOCKED] appears on the left of the screen.

Checking Clips Recorded with Canon Log Gamma (View Assistance)

When Canon Log gamma is used, the image displayed on the screen will appear darker than usual. When you are

shooting with Canon Log gamma and are checking the picture on an external monitor connected to a MON. terminal

or the HD/SD SDI you can apply a LUT to the output (A 146). In addition, you can use the view assistance function

to display an image that approximates the one that would be obtained using normal gamma settings. View assistance

is only applied on the camera screen; it will not affect your recordings or the video signal output from the various

terminals.

1 Open the [View Assist.] submenu.

[£ LCD/VF Setup] > [View Assist.]

2 Select [On] and then press SET.

• O will appear on the lower left of the screen.

NOTES

• If you set an assignable button to [View Assist.] (A 111), you can press

the button to enable the view assistance function.

System

priority

Output terminal/

Recording destination

[/ CINEMA Locked]

setting

Picture setting

3G-SDI terminals – Canon Log gamma

MON. terminals – Canon Log gamma with or without a LUT applied

CF card

[On] CINEMA preset settings with Canon Log gamma

[Off] Based on custom picture settings

MXF CF card

[On] CINEMA preset settings with Canon Log gamma

[Off] Based on custom picture settings

[~ Camera Setup]

[/ CINEMA Locked]

[On]

[£ LCD/VF Setup]

[View Assist.]

[Off]

COPY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C500PL Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C500PL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info