Bedienungsanleitung Canon EOS C500PL (Seite 176 von 212) (Englisch)

543073

176

Zoom out

Zoom in

Vorherige Seite

1/212

Nächste Seite

Menu Options

176

[Bit Rate]: Displays the bit rate when set to [On].

[Resolution]: Displays the resolution when set to [On].

[Frame Rate]: Displays the frame rate when set to [On].

[Character Rec]: Displays the character recording warning icon (S) when set to [On], indicating that the

onscreen displays will be recorded on the clip.

[Output Display]: Displays the output display warning icon (T) when set to [On], indicating that the

onscreen displays will be output to an external monitor.

[Rec Command]: Displays the status of the recording command that is being output when [ 4K/2K/MXF

Setup] > [Rec Command] is set to [On].

[User Memo]: Displays the user memo icon (Q) when set to [On], indicating that a user memo will be

recorded with a clip.

[User Bit]: Displays the user bit when set to [On].

[Audio Output CH]: Displays the audio output channel when set to [On].

[Audio Level]: Displays the audio level indicator and, if activated, the audio peak limiter icon (æ) when set to [On].

[Wi-Fi]: Displays the Wi-Fi icon („) when set to [On].

[Date/Time]: Displays the date and/or time.

[Metadata Display]: Displays the date and time of recording and/or the camera data (shutter speed, aperture

value, gain) during playback of an MXF clip.

[¤ TC/UB Setup] menu ( mode only)

Available during MXF mode only.

When the frame rate is a setting other than 29.97P, 59.94i or 59.94P, the time code is set to [NDF] and this setting cannot be changed.

[24P TC/Sync]: Determines the frequency for time code input and output and synchronization through the

GENLOCK terminal and SYNC OUT terminal (tri-level signal) when the frame rate is set to 23.98P or 24.00P.

[XF Legacy]: Synchronization mode compatible with Canon XF series camcorders. Synchronizes the time

code at a 30-frame signal and the signal from the GENLOCK terminal and SYNC OUT terminal at a 59.94i or

60.00i signal. The SYNC OUT terminal outputs a 59.94i or 60.00i signal.

[Normal]: Standard synchronization mode. Synchronizes the time code at a 24-frame signal and the signal

from the GENLOCK terminal and SYNC OUT terminal at a 23.98P or 24.00P signal. The SYNC OUT terminal

outputs a 23.98P/PsF or 24.00P/PsF signal.

[¤ User Bit Setup] menu ( mode only*)

* Not available in the [Photos] index screen or photo playback screen.

Menu item Submenu Setting options A

[Time Code] [Mode]

[Preset], [Regen.] 84

[Run]

[Rec Run], [Free Run] 84

[DF/NDF]

[DF], [NDF] 85

[Setting] [Set], [Reset] 85

[TC In/Out] [In], [Out] 89

[24P TC/Sync] [XF Legacy], [Normal] –

[User Bit] [Rec Mode] [Internal], [External] 89

[Output Mode] [Fixed], [Pulldown] 91

[Type] [Setting], [Time], [Date] 87

Menu item Setting options A

[Output Mode] [Fixed], [Pulldown] 91

COPY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C500PL Seite 176

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C500PL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info