Bedienungsanleitung Canon EOS C700 FF PL (Seite 47 von 255) (Englisch)

683260

Zoom out

Zoom in

Vorherige Seite

1/255

Nächste Seite

Preparing the Camera

[]r Removing a PL Lens

1Press the

button to turn off the camera.

• If the lens is connected to the camera’s LENS terminal,

disconnect the 12-pin cable after turning off the camera.

2 Turn the bayonet ring handles counter-clockwise.

3 Remove the lens and place the body cap back on the lens

mount and the dust caps back on the lens.

In-Camera Lens Correction

Depending on the characteristics of the lens used, the corners of an image frame may be darker than the center

due to light fall-off (peripheral illumination drop), or color shift/color fringing may be visible along high-contrast

edges in the image (chromatic aberration). If the camera has correction data available for the lens used, it can

apply this correction data to compensate as necessary.

Peripheral illumination correction is available for EF lenses. Chromatic aberration correction is available for EF

lenses and broadcast lenses, including automatic correction for broadcast lenses compatible with L.C.A.C

(A 46).

1 Attach the lens you want to use.

2 Open the desired correction screen.

[Camera Setup] (

) > [Periph. Illum. Corr.] or [Chrom. Aberr. Corr.]

• If correction data is not available, or if the broadcast lens attached is not compatible with L.C.A.C., the

corresponding menu option will appear grayed out. In the case of an EF lens, visit your local Canon Web site

and check if there is correction data available for the lens you are using. If so, download the necessary

update package and upgrade the camera’s firmware following the instructions supplied therein.

3 Select [On] and then press SET.

• As long as [Periph. Illum. Corr.] or [Chrom. Aberr. Corr.] is set to [On], the camera will automatically apply the

appropriate correction data.

NOTES

• About in-camera lens correction data: The camera contains a register of correction data for compatible EF lenses

that were available at the time the camera went on sale. Correction data for future lenses will be made

available as part of the regular updates released for the camera’s firmware. For more details, visit your local

Canon Web site.

• No peripheral illumination/chromatic aberration correction will be applied in the following cases:

- When the appropriate correction data is not available for the EF lens attached.

- When using non-Canon lenses. Even if the corresponding menu setting is available (not grayed out), setting

it to [Off] is recommended.

• When peripheral illumination correction is activated:

- Depending on the recording conditions, noise may appear in the periphery of the image as a result of the

correction.

- The level of correction will be lower for lenses that cannot provide distance information.

- The level of correction will be lower the higher the ISO speed/gain setting used.

- Due to the difference in sensor size, when using EF-S lenses, peripheral illumination fall-off may be more

pronounced.

햴

햳

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C700 FF PL Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C700 FF PL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info