Bedienungsanleitung Canon EOS C700 FF PL (Seite 82 von 255) (Englisch)

683260

Zoom out

Zoom in

Vorherige Seite

1/255

Nächste Seite

Adjusting the Aperture

NOTES

• Automatic aperture is not available when slow & fast motion recording is activated.

•

When [Camera Setup] > [Sensor Mode] is set to [Full Frame] and an EF-S lens

or Super 35mm lens is attached to the camera, the camera will not achieve optimal exposure.

• The aperture value may change in the following cases.

- While using the built-in extender or iris compensation function of an EF Cinema lens, when you switch from

automatic aperture to manual aperture.

- When the aperture’s onscreen display is changed between T values/F values.

- When the aperture controls on the lens are switched between automatic/manual mode.

• When using EF lenses/broadcast lenses that let you adjust the aperture gain, if the aperture gain is set too

high, the aperture adjustment may not be stable (aperture hunting), depending on the shooting conditions. In

such case, reset the lens’s aperture gain to its initial value.

Exposure Compensation - AE Shift

Use AE shift to compensate the exposure that was set using automatic aperture, in order to darken or lighten the

image.

You can also perform this function remotely using Browser Remote on a connected network device (A 170,

176).

1 Open the [AE Shift] submenu.

HOME screen: [IRIS] > [OPTIONS] > [AE Shift]

Monitoring menu: [Camera Setup] (

) > [AE] > [AE Shift]

2 Select an AE shift level and then press SET.

• Alternatively, you can press an assignable button set to [AE Shift +] or [AE Shift –] (A 127).

• You can select one of 17 AE shift levels from –2.0 to +2.0.

• The selected AE shift level will be displayed on the monitoring screen, next to the exposure bar, and the

camera will attempt to adjust the exposure accordingly.

Light Metering Mode

Select the light metering mode to match the recording conditions. Using the appropriate setting will ensure that

the camera obtains the most suitable exposure level when automatic aperture is used.

1 Open the [Light Metering] submenu.

[Camera Setup] (

) > [Light Metering]

2 Select the desired option and then press SET.

• Alternatively, you can press an assignable button set to [Backlight] or [Spotlight] (A 127).

• The icon of the selected mode ( or , no icon for [Standard]) appears at the left of the monitoring

screen.

The Exposure Bar

The

on top of the exposure bar indicates optimal exposure without any shift

(AE±0); the scale markings indicate the deviation from optimal exposure in

1/2 EV increments. The indicator inside the exposure bar represents the current

exposure. When the difference between current and optimal exposure is larger

than ±2 EV, the indicator will flash at the edge of the exposure bar. Optimal

exposure will change depending on the light metering mode used.

Optimal exposure AE±0

Current exposure

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C700 FF PL Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C700 FF PL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info