Bedienungsanleitung Canon EOS C700 FF PL (Seite 87 von 255) (Englisch)

683260

Zoom out

Zoom in

Vorherige Seite

1/255

Nächste Seite

White Balance

Auto White Balance (AWB)

The camera constantly adjusts the white balance automatically to achieve an optimal level. The camera will

adjust the white balance if the light source changes.

1 Select the [ AWB] setting and press SET (A 86).

• The icon and the current color temperature and CC value set automatically by the camera will appear

on the HOME screen and at the top of the monitoring screen.

NOTES

• Custom white balance may provide better results in the following cases:

- Changing lighting conditions

-Close-ups

- Subjects in a single color (sky, sea or forest)

- Under mercury lamps and certain types of fluorescent and LED lights

• You can use the [WB] > [OPTIONS] > [AWB Response] setting to change how quickly the white

balance changes in auto white balance (AWB) mode.

• If you set an assignable button to [AWB Lock] (A 127), you can press the button to lock the current white

balance settings set automatically by the camera. To cancel the lock, press the button again (resume auto

white balance mode) or select a different white balance setting.

Registering a Custom White Balance

1 Select the [

Set A] or [

Set B] setting (A 86).

• To apply the stored color temperature and CC value without changes, press SET. The rest of the procedure

is not necessary.

2 HOME screen only: Press [WB SET].

3 Point the camera at a gray card or white object so that it fills the center of the monitoring screen.

• Use the same lighting conditions you plan to use when recording.

4 Press [OK] (HOME screen) or press an assignable button set to [Set White Balance] (A 127)

(monitoring screen/direct setting mode).

•The

icon will flash on the control display. The

A or

B icon will flash quickly at the top of the

monitoring screen.

• Make sure the gray card or white object fills the center of the monitoring screen until the procedure is

completed.

• When the procedure is completed, the [White Balance] screen will appear on the control display and the

icon will stop flashing on the monitoring screen. The color temperature and CC value registered by the

camera will appear on the HOME screen and at the top of the monitoring screen, next to the

A or

icon. These settings are saved even if you turn off the camera.

• If necessary, adjust the color temperature or CC value (A 88).

NOTES

• Readjust the custom white balance if the light source changes.

• Very rarely and depending on the light source, the icon will not stop flashing. Even so, the white balance is

correctly calibrated and you can continue shooting.

• After the camera registers a custom white balance the color temperature or CC value may appear in gray. This

indicates that the value registered exceeds the range of values that can be displayed but the white balance is

correctly calibrated and you can continue shooting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C700 FF PL Seite 87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C700 FF PL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info