Bedienungsanleitung Canon EOS C700 FF PL (Seite 182 von 255) (Englisch)

683260

182

Zoom out

Zoom in

Vorherige Seite

1/255

Nächste Seite

IP Streaming

182

IP Streaming

When the main recording mode is set to [XF-AVC (CFast)], after you connect the camera to a network (Wi-Fi

(Infrastructure) or wired (Ethernet)), you can stream the camera’s live video and audio* over IP to a compatible IP

video decoder** connected to the network. You can use IP streaming for live broadcasts or to send a news flash

report from a location with poor network connectivity, since the configuration of streamed video is lower (so the

data to be transferred is smaller) than that of recorded clips.

* Only 2 channels. When recording main recording clips with 4 audio channels, you can select which two channels to stream over

IP.

** This can be a dedicated video transfer device or decoder software on a computer. For details about compatible decoders,

please visit your local Canon Web site.

Configuration of video streamed over IP

* Only when [Camera Setup] > [Sensor Mode] is set to [Super 35mm] or [Super 35mm (Cropped)].

Preparations

Before you can stream video over IP, you need to configure settings related to the transfer like the protocol and

port number to use. You can also select the configuration of the streamed video.

Camera and Receiver Settings

1 Configure the network connection settings.

• Use an Ethernet network (A 168) or a Wi-Fi network in Infrastructure mode (A 165).

2 Open the IP streaming settings submenu.

Setup screen: [NETWORK] > [IP Streaming] > [OPTIONS]

Monitoring menu: [System Setup] (

) > [Network Settings] > [IP Streaming]

3 Select the video configuration for the video streamed over IP.

[Video Output Conf.] > Desired option > Press SET

4 Select the audio channels for the IP stream.

[Audio Out Channels] > [CH1/CH2] or [CH3/CH4] > Press SET

5 Select the protocol to be used.

[Protocol] > Desired option > Press SET

• If you selected [RTP+FEC], complete the error correction settings with the following procedure (A 183).

• If you selected [RTSP+RTP], configure the RTSP user name and password with the following procedure

(A 183). Otherwise, continue this procedure to configure the receiver’s settings.

6 Select [Dest. IP Address] and then press SET.

• Enter the IP address using the keyboard screen (A 37).

• Setup screen only: Press [RESET] to reset the IP address to [0.0.0.0].

7 If necessary, select [Dest. Port No.] and press SET.

Resolution, color sampling

and frame rate

Sensor mode

Streamed signal

Video

Audio format

and bit rate

Bit rate (VBR) Resolution Frame rate

3840x2160*, YCbCr 4:2:2

59.94P, 50.00P

1920x1080, YCbCr 4:2:2

59.94P, 59.94i,

50.00P, 50.00i

Super 35mm

Super 35mm (cropped)

Super 16mm (cropped)

9 Mbps 1920x1080

59.94i, 50.00i

MPEG-2 AAC 2ch

256 Kbps

4 Mbps 1920x1080

2 Mbps 1280x720 29.97P, 25.00P

1.5 Mbps

720x480 59.94i

720x576 50.00i

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C700 FF PL Seite 182

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C700 FF PL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info