Bedienungsanleitung Canon EOS M (Seite 8 von 104) (Englisch)

501130

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Camera Care

This camera is a precision instrument. Do not drop it or subject it to physical

shock.

Do not point the camera-attached lens toward the sun. The sun’s heat can

damage the camera’s internal components.

The camera is not waterproof and cannot be used underwater. If you accidentally

drop the camera into water, promptly consult the nearest Canon Service Center.

Wipe off any water droplets with a dry cloth. If the camera has been exposed to

salty air, wipe it with a well-wrung wet cloth.

Never leave the camera near anything having a strong magnetic field such as a

magnet or electric motor. Also avoid using or leaving the camera near anything

emitting strong radio waves such as a large antenna. Strong magnetic fields can

cause camera incorrect operation or destroy image data.

Do not leave the camera in excessive heat such as in a car in direct sunlight. High

temperatures can cause the camera to malfunction.

The camera contains precision electronic circuitry. Never attempt to disassemble

the camera yourself.

Do not block the shutter operation with your finger, etc. Doing so may cause a

malfunction.

Use a blower to blow away any dust on the lens. Do not use cleaners that contain

organic solvents to clean the camera body or lens. For stubborn dirt, take the

camera to the nearest Canon Service Center.

Do not touch the camera’s electrical contacts with your fingers. This is to prevent

the contacts from corroding. Corroded contacts can cause camera misoperation.

If the camera is suddenly brought in from the cold into a warm room,

condensation may form on the camera and internal parts. To prevent

condensation, first put the camera in a sealed plastic bag and let it adjust to the

warmer temperature before taking it out of the bag.

If condensation forms on the camera, do not use the camera. This is to avoid

damaging the camera. If there is condensation, remove the lens, card and battery

from the camera, and wait until condensation has evaporated before using the

camera.

If the camera will not be used for an extended period, remove the battery and

store the camera in a cool, dry, well-ventilated location. Even while the camera is

in storage, press the shutter button a few times once in a while to check that the

camera is still working.

Avoid storing the camera where there are corrosive chemicals such as a

darkroom or chemical lab.

If the camera has not been used for an extended period, test all its functions

before using it. If you have not used the camera for some time or if there is an

important shoot coming up, have the camera checked by your Canon dealer or

check the camera yourself and make sure it is working properly.

When you detach the lens, the image sensor will be exposed. To prevent

scratching the image sensor, do not touch the image sensor.

Handling Precautions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS M Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info