Bedienungsanleitung Canon EOS M3 (Seite 38 von 201) (Englisch)

596266

Zoom out

Zoom in

Vorherige Seite

1/201

Nächste Seite

Advanced Guide

Basic Guide

Camera Basics

Auto Mode /

Hybrid Auto Mode

Other Shooting Modes

Tv, Av, and M Mode

Playback Mode

Wi-Fi Functions

Set-Up Menu

Accessories

Appendix

Index

P Mode

Tv, Av, M, and C Modes

Before Use

Movies

● The camera may become warm when shooting movies repeatedly

over an extended period. This does not indicate damage.

● Keep your ngers away from the microphone (1) while shooting

movies. Blocking the microphone may prevent audio from being

recorded or may cause the recording to sound mufed.

● Avoid touching camera controls other than the movie button

and touch-screen controls when shooting movies. Sounds

made by the camera will be recorded. Touch-screen control is

recommended when adjusting settings while shooting movies.

● The sounds of the lens and camera operating are also recorded.

This can be reduced by using an external microphone (sold

separately) (

157).

● If using a lens that supports Dynamic IS (

78), the image

display area changes and subjects are enlarged once movie

recording begins to allow correction of signicant camera shake.

To shoot subjects at the same size shown before shooting, adjust

the image stabilization setting (

78).

Still Images

● An orange AF frame is displayed with [ ] if the camera cannot

focus when you press the shutter button halfway. No picture is

taken, even if you press the shutter button all the way down.

● When no people or subjects are detected, when the subject

is dark or has no contrast, or in extremely bright conditions, it

may take longer to achieve focus, or correct focus may not be

achieved.

● A blinking [

] icon warns that images are more likely to be

blurred by camera shake. In this case, mount the camera on a

tripod or take other measures to keep it still.

● If your shots are dark despite the ash ring, move closer to the

subject. For details on the ash range, see “Internal Flash Range

Guide” (

196).

● To reduce red-eye and to assist in focusing, the lamp may be lit

when the shutter button is pressed halfway in low-light conditions.

● If the ash res, vignetting may occur depending on the lens

being used.

● A blinking [

] icon displayed when you attempt to shoot

indicates that shooting is not possible until the ash has nished

recharging. Shooting can resume as soon as the ash is ready,

so either press the shutter button all the way down and wait, or

release it and press it again.

● Although you can shoot again before the shooting screen

is displayed, your previous shot may determine the focus,

brightness, and colors used.

● The display shown right after shooting and before the saved

image is shown will feature vignetting.

● You can change how long images are displayed after shots

(

47).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS M3 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS M3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info