Bedienungsanleitung Canon EOS R5 C (Seite 91 von 254) (Englisch)

809437

Zoom out

Zoom in

Vorherige Seite

1/254

Nächste Seite

Focus

• You can change the adjustment speed and responsiveness of the autofocus function with the following

settings. Visit your local Canon website for the latest information.

- > [

Camera Setup] > [AF Speed] to set the AF speed (the speed at which the focus is adjusted)

to one of 10 levels.

- > [

Camera Setup] > [AF Response] to set the responsiveness of the autofocus function to one

of 7 levels.

- While using continuous AF (including the [Only Around Focus Point] setting), you can hold the AF-ON button

pressed down to temporarily adjust the focus using the maximum AF speed and AF response. This is helpful

when you want to focus quickly after focus was lost or to keep a subject in focus while you follow it.

• Autofocus will not work in the following cases.

- When slow & fast motion recording is activated, if using lenses not compatible with autofocus.

- When the shooting frame rate in slow & fast motion recording is not set to 24, 25, 30, 48, 50, 60,100 or 120

(fps).

• Continuous AF will not work in the following cases.

- When using an EF lens that does not have a focus mode switch.

• Autofocus may not work well on the following subjects or in the following cases. In such case, focus manually.

- When using small apertures.

- When subjects at different distances appear in the picture.

- When an ISO speed or gain value in the extended range is selected (A 76).

- When the gamma curve component of the [Gamma/Color Space] setting in the custom picture file (A 133)

is set to an option other than [BT.709 Normal] or [BT.709 Standard].

- When the main recording format is set to RAW.

AF Only Around Focus Point

In this focus mode, you can focus manually most of the way and let the camera finish focusing automatically.

This is very convenient when you want to make certain that high-resolution clips (4K and higher) are in sharp

focus.

Additionally, with this mode, if the camera cannot evaluate how to adjust the focus, it will not perform unreliable

focus adjustments. This results in a more stable focusing operation overall than with continuous AF.

1 Set the focus mode on the lens to automatic (A87).

2 Select > [

Camera Setup] > [Continuous AF] > [Only Around Focus Point].

• When the focus is in the manual adjustment range, a yellow continuous AF frame will appear on the screen.

3 If necessary, change the type and position of the AF frame (A92).

4 Turn the focus ring to adjust the focus.

• Focus manually to bring the subject closer into focus. When the focus enters the automatic adjustment

range, the focus frame will turn white and the camera will then finish focusing automatically.

• While the focus stays within the automatic adjustment range, the camera will keep the subject in focus

automatically.

- Reflective surfaces

- Subjects with low contrast or without vertical lines

- Fast moving subjects

- Through dirty or wet windows

-Night scenes

- Subjects with a repetitive pattern

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS R5 C Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS R5 C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info