809437
113
Zoom out
Zoom in
Vorherige Seite
1/254
Nächste Seite
113
Adding Marks to Clips in CAMERA Mode
Adding Marks to Clips in CAMERA Mode
When the main recording format is set to XF-AVC, while recording, you can add shot marks (!) to flag an
important shot or frame. After recording a clip, you can add an OK mark ($) or check mark (%) to help you
identify particular clips.
You can add and delete marks also in MEDIA mode (A 146, 146).
Marks cannot be added to proxy clips.
Adding a Shot Mark while Recording
To add a shot mark to a clip while recording, you must set an assignable button to [Add Shot Mark] in advance.
1Set an assignable button to [Add Shot Mark] (A125).
2 While you are recording, press the assignable button at the beginning of the shot you wish to mark.
[Shot Mark] will appear briefly and the shot mark will be added to the current frame of the clip.
NOTES
NOTES
Up to 100 shot marks can be added to a single clip.
There may be up to a 0.5 second delay from when you press the button to when the camera adds the shot
mark.
When a clip contains a shot mark, ! will appear next to the clip’s thumbnail in the playback index screen.
When pre-recording is activated or during interval recording/frame recording, you cannot add a shot mark
before the REC button is pressed.
Adding an $ Mark or % Mark to the Last Clip Recorded
$marks can be used to protect important clips, as clips with an $ mark cannot be deleted with the camera.
To add a mark in CAMERA mode, you must set an assignable button to [Add $ Mark] or [Add % Mark] in
advance.
1Set an assignable button to [Add $ Mark] or [Add % Mark] (A125).
2 After recording a clip, press the assignable button.
•[$Mark] or [%Mark] will appear briefly and the selected clip mark will be added to the clip.
NOTES
NOTES
A clip cannot have both an $ mark and a % mark at the same time.
When a clip has an $ mark or % mark, the respective icon will appear next to the clip's thumbnail in the
playback index screen.
113

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon EOS R5 C wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Canon EOS R5 C

Canon EOS R5 C Bedienungsanleitung - Deutsch - 263 seiten

Canon EOS R5 C Bedienungsanleitung - Deutsch - 815 seiten

Canon EOS R5 C Bedienungsanleitung - Englisch - 797 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info