Bedienungsanleitung Canon EOS R5 C (Seite 121 von 254) (Englisch)

809437

121

Zoom out

Zoom in

Vorherige Seite

1/254

Nächste Seite

121

Special Recording Modes

• About the time code when frame recording is activated:

- The time code mode can be set to [Regen.], or to [Preset] with [Rec Run] running mode. The time code

advances by the number of frames recorded every time.

- If the time code running mode was set to [Free Run] or the camera was synchronized to an external time

code signal, the time code running mode will be changed automatically to [Rec Run] when frame recording

is activated.

- When the special recording mode is deactivated, the time code running mode will return to its previous

setting.

- The time code signal will not be output from the TIME CODE terminal or HDMI OUT terminal.

Interval Recording Mode

Set the interval and number of frames in advance. Sound is not recorded in this mode.

You can also use direct touch control to perform this function (A58).

1Select > [

Recording/Media Setup] > [Recording Mode] > [Interval Recording].

• [INT STBY] appears at the top of the screen (with [INT] flashing).

2Select > [

Recording/Media Setup] > [Interval Rec: Time Interval] > Desired option.

3Select > [

Recording/Media Setup] > [Interval Rec: Frame Rate] > Desired option.

4Press the REC button to begin recording.

• The tally lamp illuminates in red.

• [INT STBY] changes to [INT ÜREC] while recording.

• The camera automatically records the set number of frames at the specified interval.

5Press the REC button again to stop recording.

• The tally lamp illuminates in green and [INT STBY] appears at the top of the screen (with [INT] flashing).

6Select > [

Recording/Media Setup] > [Recording Mode] > [Normal Recording] to stop interval

recording.

NOTES

• Interval recording cannot be used simultaneously with slow & fast motion recording, pre-recording, frame

recording or continuous recording.

• Interval recording cannot be used when the frame rate is set to 59.94i or 50.00i. When in use, interval

recording will end if the frame rate is set to 59.94i or 50.00i.

• The interval and the number of frames recorded cannot be changed while recording.

• Some frames at the point the recording was stopped may be recorded and added to the end of the clip.

• About the time code when interval recording is activated:

- The time code mode can be set to [Regen.], or to [Preset] with [Rec Run] running mode. The time code

advances by the number of frames recorded every time.

- If the time code running mode was set to [Free Run] or the camera was synchronized to an external time

code signal, the time code running mode will be changed automatically to [Rec Run] when interval recording

is activated.

- When the special recording mode is deactivated, the time code running mode will return to its previous

setting.

- The time code signal will not be output from the TIME CODE terminal or HDMI OUT terminal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS R5 C Seite 121

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS R5 C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info