Bedienungsanleitung Canon EOS R5 C (Seite 131 von 254) (Englisch)

809437

131

Zoom out

Zoom in

Vorherige Seite

1/254

Nächste Seite

131

Custom Picture Settings

Look Files

You can register LUT files created with Blackmagic Design’s DaVinci Resolve as Look Files in the custom picture

file. Using a Look File allows you to adjust the video quality of the recorded video. These adjustments apply also

to proxy clips, photos, and screen/output terminals.

1Insert the SD card with the desired Look File (.cube format, located in the root directory of the SD

card) into the camera’s card slot 2.

2Select a custom picture file. (A129)

3Select > [

Custom Picture] > [Edit

File] > [Gamma/Color Space] > Desired option.

4Select > [

Custom Picture] > [Edit

File] > [Look File Setup] > [Register].

• The Look Files in the SD card will be displayed.

5Select the desired Look File.

6Select the [Gamma/Color Space] setting to use after the Look File is applied.

7Select [OK] twice.

• The selected Look File will be loaded and registered to the custom picture file.

• The image quality adjustments set in the Look File will be applied, and will appear on the screen.

• When disabling the image quality adjustments set in the Look File, select > [

Custom Picture] >

[Edit

File] > [Look File] > [Off].

NOTES

About Look files

- The camera supports LUT files (3D LUT/.cube format) in 17 grid or 33 grid format created with Blackmagic

Design’s DaVinci Resolve.

- LUT files with input ranges outside the 0 to 1 range in the header (“LUT_3D_INPUT_RANGE”) are not

supported.

- LUT files which include values outside of the 0 to 1 range in the data area are not supported.

- LUT files 2 MB and larger, as well as files with a name containing over 65 characters are not supported.

- Only the following characters can be used in the file name:

Numbers 0 to 9, upper/lower case letters a to z, underscore (_), hyphen (-), period (.) and a single byte

space.

• If the correct input/output gamma curve and color space conversion are not selected, video will not be output

correctly.

• A Look File cannot be used if the [Gamma/Color Space], [HLG Color] or [Over 100%] settings are changed

after registering it.

• When the gamma curve component of the [Gamma/Color Space] setting in the custom picture is set to either

[BT.709 Normal], [BT.709 Standard] or [BT.709 Wide DR], super-white (video signal above 100%) and super-

black (video signal below 0%) levels of brightness will be clipped. When the video signal contains super-white

brightness levels, select > [/ Custom Picture] > [Edit / File] > [Other Functions] > [Over 100%] >

[Press] and then activate the Look File to apply it to a signal compressed to 100%.

• When playing RAW clips, the Look File registered when the clip was recorded will only be applied to the

thumbnail and not the clip itself.

Deleting a Look File

You can delete Look Files registered in custom picture files.

1 Select a custom picture file (A129).

2 Select > [

Custom Picture] > [Edit

File] > [Look File Setup] > [Delete] > [OK].

• The Look File will be deleted and the image quality adjustments will be reversed to the original settings of the

selected custom picture file.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS R5 C Seite 131

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS R5 C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info