Bedienungsanleitung Canon EOS R5 C (Seite 200 von 254) (Englisch)

809437

200

Zoom out

Zoom in

Vorherige Seite

1/254

Nächste Seite

Menu Options

200

[Key Lock] [All Buttons], [All Except REC Button] (A25)

[REC Button] [Disable], [Enable] (A49)

Enables or disables the use of the REC buttons.

[Assign. Button 10 as REC],

[Assign. Button 13 as REC]

[On], [Off] (A125)

This setting turns assignable button 10/13 to an alternative REC button.

[Onscreen REC/STBY Button] [On], [Off] (A49)

When this setting is set to [On], the recording operation indicator (REC/STBY) on the CAMERA mode

screen becomes an onscreen button you can touch to start/stop recording.

[Touch Screen Response] [Normal], [Low] (A19)

[Tally Lamp],

[Card Access LED]

[On], [Off]

These settings determine whether the following LEDs and indicators will illuminate.

[Tally Lamp]: The tally lamp (A 12) when the camera starts up and while recording.

[Card Access LED]: The card access indicator (A 35) when the camera is accessing the card.

[Fan Mode] [Automatic], [Always On] (A45)

[Fan Speed (STBY)] [Maximum], [High], [Middle], [Low]

[Fan Speed (REC)],

[Fan Speed (Always)], [Fan Speed]

[High], [Middle], [Low]

[Review Recording] [Entire Clip], [Last 4 sec] (A57)

[GPS Auto Time]2[On], [Off]

When this setting is set to [On], the camera automatically adjust its date and time settings according to

the information received from the GPS signal.

• While the automatic date/time adjustment is activated, the > [

System Setup] > [Date/

Time] setting will not be available.

• The time will not be updated while recording video.

[USB Mode] [Video Output (UVC)], [Canon App(s) for iPhone], [PTP Connection/GP-E2] (A124)

Select [PTP Connection/GP-E2] when connecting the GP-E2 GPS Receiver to the camera using an optional

interface cable.

[Retract Lens] [On], [Off]

When a compatible lens (A241) is attached to the camera and the focus mode switch on the lens is set

to AF, if this setting is set to [On], the lens will retract fully when the camera is turned off.

When this setting is set to [On], turning off the camera will move the focus position. To prevent this, set

this setting to [Off]. Note that there is no guarantee that the focus position will not move, so checking the

focus position is recommended when turning on the camera.

[Shutter at Shut Down] [Close], [Open]

This setting allows you to choose whether the shutter closes or remains open when the power switch is

set to OFF.

• The [Close] setting is recommended during normal use in order to protect the camera's sensor from

dust or dirt when changing lenses.

• Select the [Open] setting when you want to reduce the sound caused by setting the power switch from

VIDEO to OFF or from OFF to VIDEO.

[Sensor Cleaning] [At Power ON/OFF], [At Power OFF], [Off] (A47)

[Reset Hour Meter] The camera has two “hour meters” – the first keeps track of total operation time* and the second keeps

track of operation time* since the last time the second hour meter was reset with this function.

* Only operation time in VIDEO mode.

[Certification Information] This displays select certification information that apply to this camera.

Menu item Setting options and additional information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS R5 C Seite 200

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS R5 C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info