Bedienungsanleitung Canon fax b 150 (Seite 133 von 138) (Englisch)

423973

133

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

One-touch Speed Dialling buttons

The rectangular buttons numbered 01 to 10 on

the operation panel, each of which may be

registered as a fax or telephone number. Once

a number is registered, you press one button to

dial the entire number.

Pause

A timing entry required for registering certain

long distance numbers and for dialling out

through some telephone systems or

switchboards.

PBX

Private branch exchange. See Switchboard.

PHOTO

The document setting you use for sending

documents with intermediate tones, such as

photographs.

Pulse

See Rotary pulse.

Redialling-automatic

When the fax you dial does not answer or a

sending error occurs, the fax waits for a

speciﬁed interval and then redials the same fax

number. You can adjust the number of redials

and the length of time between redialling.

Redialling-manual

When you use the regular dialling method, you

can quickly call the last number dialled by

pressing [REDIAL].

Reduction mode

The fax’s automatic feature that slightly

reduces the received image to allow room at

the top of the page for the sender’s ID

information. You can also reduce the size of

large incoming documents using the RX

REDUCTION option.

Resolution

The density of dots for any given output

device. Expressed in terms of dots per inch

(dpi). Low resolution causes font characters

and graphics to have a jagged appearance.

Higher resolution means smoother curves and

angles as well as a better match to traditional

typeface designs. Resolution values are

represented by horizontal data and vertical

data.

Rotary pulse

A telephone dialling system where a dial is

rotated to send pulses to the telephone

switching system. When you pulse dial, you

hear clicks. When you touch-tone dial, the

most common dialling system, you hear tones.

Rotary pulse dialling requires certain setting

adjustments.

Sender ID

The identifying information from the sender at

the top of a document including: date and

time, the sender’s fax/telephone number,

sender’s name, receiver’s name or company

name, and page number. Also called TTI or

Transmit Terminal ID.

Sending speed

The bits per second rate at which documents

are sent. See also bps.

STANDARD

A document setting for sending normal

typewritten or printed documents containing

only text and no drawings, photographs, or

illustrations.

Standby

The mode in which the fax is on and ready to

use. All operations start from standby mode

when the LCD displays the date and time.

Switchboard

Also called a PBX (Private Branch Exchange)

internal switching system. A telephone system,

usually for a large company ofﬁce with many

extensions, whereby you must dial an outside

line number along with the regular telephone

or fax number. Dialling out through a

switchboard sometimes requires use of the

[REDIAL/PAUSE] button.

Timed sending

Setting the fax to transmit documents at a

preset time in the future. See also Delayed

sending.

Tone/pulse setting

The ability to set the fax to match the

telephone dialling system your telephone line

uses: touch-tone or rotary pulse.

Glossary

121

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon fax b 150 Seite 133

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info