Bedienungsanleitung Canon Fax-JX300 (Seite 76 von 87) (Englisch)

501628

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

74 Troubleshooting

LCD Messages

The following messages are displayed on the LCD when the fax is performing a function or

encounters an error.

 !!CHECK!! 5100

 !!CHECK!! 5B00

 AUTO REDIAL

 BUSY/NO SIGNAL

Cause Action

Movement of the FINE Cartridge

Holder is blocked.

Clear the paper jam or foreign object that is preventing the FINE Cartridge

Holder from moving, then turn off the machine and turn it back on again.

There may be an obstruction that is not

allowing the Cartridge Holder

mechanism to move.

Check for any obstruction (paper clip, small object, etc.) and also that the

protective tape are removed from the FINE Cartridge. Check also for a paper

jam and clear the jam if necessary (see page 65). Then press [Stop] and start

again.

The FINE Cartridge may be defective. Press [Stop]. Reinstall the FINE Cartridge (see the Easy Setup Instructions) and

start again.

In either case, if the error does not clear, try unplugging the fax. Wait several

minutes, then plug it back in. Also, try replacing the FINE Cartridge with a new

one (see page 55).

During printing, the FINE Cartridge

print head may have become too hot.

Allow the fax to cool down. The fax will resume printing when it has cooled

down.

An error requiring servicing might have

occurred.

Turn OFF the machine, and unplug the power cord of the machine from the

power supply. After a while, plug the power cord of the machine back in and turn

ON the machine. If the same error occurs, contact a Canon service

representative.

Cause Action

The ink absorber (which holds the ink

used for print head cleaning) may be

full.

Contact a Canon service representative as early as possible.

Cause Action

The fax is waiting to redial the receiving

number because the line was busy or

the receiving party did not answer

when you tried to send the document.

Wait for the fax to automatically redial the number. If you want to cancel

automatic redialing, press [Stop] (see page 23).

Cause Action

The telephone number you dialed is

busy.

Try sending the document at a later time.

The fax number dialed was incorrect. Check the fax number and dial again.

The other party’s fax machine is not

working.

Contact the other party and have them check their fax machine.

The other party is not using a G3

machine.

Contact the other party and ask them to send or receive the document using a

G3 machine.

The touch tone/dial pulse setting on

your fax is incorrect.

Set your fax to the setting that matches your telephone line (see page 9).

The receiving fax machine did not

answer within 55 seconds (after all

automatic redialing attempts).

Contact the receiving party and have them check their fax machine. You can try

to send the document using manual sending (see page 18). For long-distance

call, add pauses to the registered number (see page 22).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Fax-JX300 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info