55775
59
Zoom out
Zoom in
Vorherige Seite
1/89
Nächste Seite
Connecting to a TV or VCR
External Connections
59
E
6 This camcorder: Stop playback.
NOTES
We recommend powering the camcorder
using the compact power adapter.
When recording to a VCR using an analog
connection –connection types or ( 55)–,
the quality of the edited tape will be lower than
the original.
When recording to a digital video recorder
using the HDV/DV terminal –connection type
( 55)–:
- If the picture does not appear, disconnect the
DV cable and restore the connection after a
short while or turn the camcorder off and then
on again.
- Proper operation cannot be guaranteed for all
digital devices equipped with a DV terminal. If
the operation does not work, use the AV IN/
OUT terminal.
Analog Line-In Recording
You can input video from an analog video
source (VCR, TV, etc.) and record the
input video on the tape in the camcorder
in DV standard. Analog video cannot be
converted to HDV standard.
Connecting
Connect the camcorder to the video input
source using one of the analog
connections –connection types or
( 55) shown in the previous section
Connection Diagrams
.
Recording
1 Load a blank tape in this camcorder.
2 Connected device: Load the
recorded cassette or disc.
3 Press .
4 Connected device: Start the
playback.
In record pause mode and while
recording you can check the picture on
the camcorder’s screen.
5 When the scene you wish to record
appears, press .
Recording starts.
6 While recording, press to
pause the recording.
In record pause, press again to
resume recording.
7 Press to stop recording.
8 Connected device: Stop the
playback.
IMPORTANT
Depending on the analog signal sent from the
connected device the input image may be
distorted or not be displayed at all (for example,
video input that includes copyright protection
signals or anomalous signals such as ghost
signals).
When connecting to a TV/VCR with a SCART
terminal –connection type ( 55)–, use a
SCART adapter with input capability
(commercially available). The supplied PC-A10
SCART Adapter is for output only.
NOTES
We recommend powering the camcorder using
the compact power adapter.
(8)
3 4
2
3 4
REC PAUSE
/
/
/
4
59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon HV10 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Canon HV10

Canon HV10 Bedienungsanleitung - Deutsch - 100 seiten

Canon HV10 Bedienungsanleitung - Holländisch - 90 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info