Bedienungsanleitung Canon HV10 (Seite 68 von 89) (Englisch)

55775

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

Connecting to a Printer

print by selecting 2-, 4-, 9- or [16-UP]. You can

also use this setting to print on the specially

designed photo stickers sheets.

- When the paper size is set to [A4] you can

print 4 copies on the same sheet by selecting

[4-UP].



Canon PIXMA/SELPHY CP Printers:

- When the paper size is set to [CREDITCARD]

you can print multiple small copies on a single

print by selecting 2-, 4-, or [8-UP]. You can also

use [8-UP] to print on the specially designed

photo stickers sheets.

- When the paper size is set to [10 x 14.8 cm]

or [9 x 13 cm] you can print 2 or 4 copies on the

same sheet by selecting [2-UP] or [4-UP].

- When you are using the specially designed

wide-sized photo paper you can set the paper

size to [DEFAULT] and print 2 or 4 copies on

the same sheet by selecting [2-UP] or [4-UP].

Printing after Changing the Print Settings

1 Press .

• The print setting menu appears.

• Depending on the printer, the

message “BUSY.” may appear before

the camcorder displays the print

setting menu.

2 In the print settings menu, select

( ) the setting you want to change

and press .

3 Select ( ) the desired setting

option and press .

4 Select ( ) [PRINT] and press

• Printing starts. The print setting menu

disappears when the printing is

completed.

• To continue printing, select another

still image.

CANCEL

THE

PRINTING

Press while printing. A confirmation

dialog appears. Select [OK] and press .

With Canon’s PictBridge compatible printers,

the printing will stop immediately (even if not

completed) and the paper will be fed through.

RINTING

ERRORS

If an error occurs during the printing process, an

error message appears ( 76).

- Canon’s PictBridge compatible printers:

Resolve the error. When printing does not

resume automatically, select [CONTINUE] and

press . If [CONTINUE] cannot be

selected, select [STOP], press and retry

printing. Refer also to the printer’s instruction

manual for details.

- If the error still persists and printing does not

restart, disconnect the USB cable and turn off

the camcorder and the printer. After a short

while, turn them on again, set the camcorder to

mode and restore the connection.

HEN

YOU

HAVE

FINISHED

PRINTING

Disconnect the cable from the camcorder and

printer and turn off the camcorder.

IMPORTANT

The following still images may not be

correctly printed with a PictBridge compatible

printer.

- Images created or changed on a computer

and transferred to the memory card.

- Images recorded with the camcorder but

edited on a computer.

- Images whose file names were changed.

- Images not recorded with this camcorder.

Observe the following precautions during

printing:

- Do not turn off the camcorder or the printer.

- Do not change the position of the /

switch.

- Do not disconnect the USB cable.

- Do not remove the memory card.

If the message “BUSY.” does not disappear,

disconnect the USB cable and restore the

connection after a short while.

Trimming Settings

Set the paper size and page layout before

changing the trimming settings.

1 In the print setting menu, select

( ) [TRIMMING] and press .

SET

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon HV10 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon HV10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info