Bedienungsanleitung Canon jx210p (Seite 82 von 86) (Englisch)

424325

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

81Appendix

Appendix

Users in the U.S.A.

 Pre-Installation Requirements

Order Information

When ordering service from the telephone company for this equipment, the following may be

required.

Universal Service Order Code (USOC): RJ11C

The Facility Interface Code (FIC): 02LS2

Service Order Code (SOC): 9.0F

 Connection of the Equipment

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.

On the bottom of this equipment is a label that contains, among other information, a product identifier

in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone

company.

The REN is used to determine the number of devices that may be connected to a telephone line.

Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming

call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the

number of devices that may be connected to a line, as determined by the total RENs, contact the

local telephone company. The REN for this product is part of the product identifier that has the format

US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is

a REN of 0.3).

A plug and jack used to connect this equipment to the premises wiring and telephone network must

comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant

telephone cord and modular plug is provided with this product. It is designed to be connected to a

compatible modular jack that is also compliant. See installation instructions for details.

Connection to party lines is subjected to state tariffs. Contact the state public utility commission,

public service commission or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the

installation of this equipment does not disable your alarm equipment. If you have questions about

what will disable alarm equipment, consult your telephone company or a qualified installer.

This equipment is hearing aid compatible.

 In Case of Equipment Malfunction

Should any malfunction occur which cannot be corrected by the procedures described in this guide,

disconnect the equipment from the telephone line cable, turn off the power and disconnect the power

cord. The telephone line cable should not be reconnected or the main power switch turned ON until

the problem is completely resolved. Users should contact their local authorized Canon Facsimile

Service Dealer for the servicing of equipment.

Information regarding Authorized Service Facility locations can be obtained by calling the Canon

Customer Center.

 Rights of the Telephone Company

If this equipment causes harm to the telephone network, the telephone company may temporarily

disconnect service. The telephone company also retains the right to make changes in facilities and

services that may affect the operation of this equipment. When such changes are necessary, the

telephone company is required to give adequate prior notice to the user. However, if advance notice

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon jx210p Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon jx210p

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info