Bedienungsanleitung Canon LBP112 i-SENSYS (Seite 74 von 256) (Alle Sprachen)

682198

Zoom out

Zoom in

Vorherige Seite

1/256

Nächste Seite

Appendix

Important Safety

Instructions

This manual describes only warnings and

cautions for the installation and the power

supply. Be sure to read "Important Safety

Instructions" described in the User's Guide also.

WARNING

Indicates a warning concerning operations

that may lead to death or injury to persons if

not performed correctly. To use the machine

safely, always pay attention to these

warnings.

CAUTION

Indicates a caution concerning operations

that may lead to injury to persons if not

performed correctly. To use the machine

safely, always pay attention to these

cautions.

IMPORTAN

Indicates operational requirements and

restrictions. Be sure to read these items

carefully to operate the machine correctly

and avoid damage to the machine or

property.

Installation

To use this machine safely and comfortably,

carefully read the following precautions and

install the machine in an appropriate location.

WARNING

Do not install in a location that may result in a

fire or electrical shock

• A location where the ventilation slots are

blocked (too close to walls, beds, sofas, rugs,

or similar objects)

• A damp or dusty location

• A location exposed to direct sunlight or

outdoors

• A location subject to high temperatures

• A location exposed to open flames

• Near alcohol, paint thinners or other

flammable substances

Other warnings

• Do not connect unapproved cables to this

machine. Doing so may result in a fire or

electrical shock.

• Do not place necklaces and other metal

objects or containers filled with liquid on the

machine. If foreign substances come in

contact with electrical parts inside the

machine, it may result in a fire or electrical

shock.

• If any foreign substance falls into this

machine, unplug the power plug from the AC

power outlet and contact your local

authorized Canon dealer.

CAUTION

Do not install in the following locations

The machine may drop or fall, resulting in injury.

• An unstable location

• A location exposed to vibrations

Other cautions

• When carrying this machine, follow the

instructions in this manual. If carried

improperly, it may fall, resulting in injury.

• When installing this machine, be careful not

to get your hands caught between the

machine and the floor or walls. Doing so may

result in injury.

PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1

The laser beam can be harmful to human bodies.

Since radiation emitted inside the product is

completely confined within protective housings

and external covers, the laser beam cannot

escape from the machine during any phase of

user operation. Read the following remarks and

instructions for safety.

• Never open covers other than those

instructed in the manuals for this machine.

• If the laser beam should escape and enter

your eyes, exposure may cause damage to

your eyes.

• Use of controls, adjustments, or performance

of procedures other than those specified in

this manual may result in hazardous radiation

exposure.

Laser Safety Label

Safety-Related Symbols

Power switch: “ON” position

Power switch: “OFF” position

Power switch: “STAND-BY” position

Push-push switch “ON” “OFF”

Protective earthing terminal

Dangerous voltage inside. Do not open

covers other than instructed.

CAUTION: Hot surface. Do not touch.

Class II equipment

Moving parts: Keep body parts away from

moving parts

CAUTION: An electrical shock may occur.

Remove all the power plugs from the power

outlet.

There are sharp edges. Keep body parts

away from sharp edges.

• Some of symbols shown above may not be

affixed depending on the product.

Consumables

WARNING

Do not dispose of used toner cartridges in open

flames. Also, do not store toner cartridges or

paper in a location exposed to open flames. This

may cause the toner or paper to ignite, and

result in burns or fire.

Avoid poorly ventilated locations

This machine generates a slight amount of

ozone and other emissions during normal use.

These emissions are not harmful to health.

However, they may be noticeable during

extended use or long production runs in poorly

ventilated rooms. To maintain a comfortable

working environment, it is recommended that

the room where the machine operates be

appropriately ventilated. Also avoid locations

where people would be exposed to emissions

from the machine.

Power Supply

WARNING

• Use only a power supply that meets the

specified voltage requirements. Failure to do

so may result in a fire or electrical shock.

• Do not use power cords other than the one

provided, as this may result in a fire or

electrical shock.

• The provided power cord is intended for use

with this machine. Do not connect the power

cord to other devices.

• Do not modify, pull, forcibly bend, or perform

any other act that may damage the power

cord. Do not place heavy objects on the

power cord. Damaging the power cord may

result in a fire or electrical shock.

• Do not plug in or unplug the power plug

with wet hands, as this may result in an

electrical shock.

• Do not use extension cords or multi-plug

power strips with the machine. Doing so may

result in a fire or electrical shock.

• Do not wrap the power cord or tie it in a knot,

as this may result in a fire or electrical shock.

• Insert the power plug completely into the AC

power outlet. Failure to do so may result in a

fire or electrical shock.

• Remove the power plug completely from the

AC power outlet during a thunder storm.

Failure to do so may result in a fire, electrical

shock, or damage to the machine.

• Make sure that the power supply for the

machine is safe, and has a steady voltage.

• Keep the power cord away from a heat

source; failure to do this may cause the power

cord coating to melt, resulting in a fire or

electrical shock.

Avoid the following situations:

If excessive stress is applied to the connection

part of the power cord, it may damage the

power cord or the wires inside the machine may

disconnect. This could result in a fire.

• Connecting and disconnecting the power

cord frequently.

• Tripping over the power cord.

• The power cord is bent near the connection

part, and continuous stress is being applied

to the power outlet or the connection part.

• Applying excessive force on the power plug.

CAUTION

Install this machine near the power outlet and

leave sufficient space around the power plug so

that it can be unplugged easily in an emergency.

Handling

CAUTION

Laser Safety

This product is confirmed as a Class 1 laser

product in IEC60825-1:2014 and EN60825-1:2014.

CLASS 1 LASER PRODUCT

LASER KLASSE 1

APPAREIL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

Canon LBP112 i-SENSYS Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon LBP112 i-SENSYS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info