682278
489
Zoom out
Zoom in
Vorherige Seite
1/649
Nächste Seite
Check the authentication settings.
The authentication method set on the machine does not match the authentication method set on the
RADIUS server.
Check that the same authentication method is set on this machine and the RADIUS server, and set the
correct authentication method.
Conguring IEEE 802.1X Authentication Settings(P. 262)
Color printing is restricted. Only Black & White printing is available.
Color printing is disabled in the Department ID Management.
T
o print in color, log in using a Department ID for which color printing is not restricted. Contact your
Administrator for the Department ID and PIN.
Setting the Department ID Management(P. 224)
Could not connect.
Connection in Access Point Mode failed due to an error.
W
ait a few moments and try again. If you still cannot connect, try switching the machine off briey.
Connecting Directly (Access Point Mode)(P. 200)
Could not connect. Check the PSK settings.
The network key (PSK) of a wireless router to be connected is not set to the machine correctly.
Check the network k
ey (PSK) of the wireless router, and set it to the machine again.
Checking the SSID and Network Key(P. 39)
Setting Up Connection by Selecting a Wireless Router(P. 33)
Setting Up Connection by Specifying Detailed Settings(P. 36)
If
the problem persists even after checking the network key, check whether the machine is properly
installed and ready to connect to the network.
Installation/Settings Problems(P. 455)
Could not connect. The maximum number of devices that can connect to the
access point has been r
eached./Could not connect. Max no. of devices that
can connect to access point reached
The machine attempted to connect to a wireless LAN router to which the maximum number of devices
wer
e already connected.
Decrease the number of devices (clients) that are connected to the wireless LAN router. For information on
the maximum number of devices that can connect, see the instruction manual for the wireless LAN router
or contact the manufacturer.
Troubleshooting
483
489

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon LBP653 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Canon LBP653

Canon LBP653 Bedienungsanleitung - Deutsch - 661 seiten

Canon LBP653 Bedienungsanleitung - Holländisch - 656 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info