Bedienungsanleitung Canon Legria FS36 (Seite 80 von 111) (Englisch)

501638

Zoom out

Zoom in

Vorherige Seite

1/111

Nächste Seite

Additional Information

• If the degree of camcorder shake is too high, the image stabilizer may not be able to fully

compensate. The image stabilizer may not be able to successfully eliminate all blur if the

camcorder or the subject is moving too much.

• The image stabilizer may not work well on subjects with low contrast, with a recurring,

repetitive pattern or without vertical lines.

• When [IMG STAB] is set to [ DYNAMIC], if the background’s movement does not

appear natural, select [ STANDARD] or [

OFF].

• We recommend setting the image stabilizer to [

OFF] when using a tripod.

[WIDESCREEN]: The camcorder uses the full width of the image sensor providing high-

resolution 16:9 recordings.

• Since the screen on the camcorder has an aspect ratio of 16:9, recordings with a 4:3

aspect ratio will appear in the center of the screen with black sidebars.

• Playing back a widescreen recording: TV sets compatible with the WSS system will

automatically switch to wide (16:9) mode. Otherwise, change the aspect ratio of the TV

manually. To play back on a TV with normal aspect ratio (4:3) change the [TV TYPE]

setting accordingly ( 83).

• The camcorder retains the last setting used even if you set the camcorder to mode.

[FOCUS PRI.]:

When the focus priority is activated, the camcorder records a photo only

after the focus has been adjusted automatically. You can also select which AF frames to use.

[ ON:AiAF]: One or more AF frames out of the nine frames available are automatically

selected and the focus is fixed on them.

[ ON:CENTER]: A single focusing frame appears in the center of the screen and the

focus is automatically fixed on it.

[ OFF]: No AF frame will appear and the photo will be recorded immediately after you

press .

• When the recording program is set to [ FIREWORKS], focus priority is

automatically set to [ OFF].

[A.SL SHUTTER]: The camcorder automatically uses slow shutter speeds to obtain

brighter recordings in places with insufficient lighting.

• The camcorder uses shutter speeds down to 1/25 (1/12 in mode).

• The setting can be changed when the camcorder is set to or mode. The

camcorder retains the last setting used even if you set the camcorder to mode.

• If a trailing afterimage appears, set the slow shutter to [ OFF].

• If (camcorder shake warning) appears, we recommend stabilizing the camcorder, for

example, by mounting it on a tripod.

[WIND SCREEN]: The camcorder automatically reduces the background sound of wind

when recording outdoors.

• Some low-frequency sounds will be suppressed along with the sound of wind. When

recording in surroundings unaffected by wind or if you want to record low-frequency

sounds, we recommend setting the wind screen to [ OFF ].

[REVIEW]: Selects the time to display a photo after it has been recorded to the memory.

• If you press while reviewing a photo it will continue to be displayed indefinitely.

Press halfway to return to the normal display.

PHOTO

DISP.

PHOTO

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Legria FS36 Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Legria FS36

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info