Bedienungsanleitung Canon Legria HF G26 (Seite 111 von 146) (Englisch)

708912

111

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

Appendix: Menu Options Lists

111

[Auto Slow Shutter]: The camcorder automatically uses slow shutter speeds to obtain brighter

recordings in places with insufficient lighting.

• Minimum shutter speed used: 1/25; 1/12 when the frame rate is set to PF25.00 or 25.00P.

• The auto slow shutter can be activated only during mode, when the recording program is set

to [’ Programmed AE].

• If a trailing afterimage appears, set the slow shutter to [j Off].

•If > (camcorder shake warning) appears, we recommend stabilizing the camcorder, for example,

by mounting it on a tripod.

[Flicker Reduction]: When set to [k Automatic], the camcorder will automatically detect and reduce

flicker.

• When recording under light sources such as fluorescent, mercury or halogen lamps, the screen may

flicker depending on the shutter speed. You may be able to avoid flicker by setting the shutter speed

mode to a value matching the frequency of the local electrical system: 1/100 for 50 Hz systems,

1/60 for 60 Hz systems.

[ND Filter]: Available in any recording program other than the Special Scene recording programs. When

set to [k Automatic], ND filter settings will be available when the aperture value is F4.0.

[Conversion Lens]: When you attach to the camcorder the optional TL-H58 Tele-converter or WA-H58

Wide Attachment, set the appropriate conversion lens setting. The camcorder will then optimize the

image stabilization and adjust the minimum object distance. The minimum object distance throughout

the entire zoom range will be 130 cm for the Tele-converter and about 60 cm for the Wide Attachment.

When you select [¿ WA-H58] and you zoom in, the zoom position marker will stop before reaching

the end of the zoom bar.

• This Wide Attachment decreases the focal length by a factor of 0.75.

• When you select a setting other than [j Off], the AF mode is automatically set to [@ Normal

AF].

• The approximate subject distance displayed on the screen will change depending on the setting. If

you are not using an optional lens, select [j Off].

[Onscreen Markers]: You can display a grid or a horizontal line at the center of the screen. Use the

markers as a reference to make sure your subject is framed correctly (vertically and/or horizontally).

• Using the onscreen markers will not affect the recordings.

[Surround Mic Directionality]: Sets the directionality mode of the optional SM-V1 Surround Microphone.

[ò Surround]: Records 5.1ch surround sound.

[ó Zoom]: Records 5.1ch sound. Additionally, the audio is linked to the zoom position. The larger

the subject appears on the screen, the louder the sound will be as well.

[ô Shotgun]: Records 5.1ch sound. This is a highly directional setting that is most sensitive to

sound coming directly from the front of the camcorder/microphone.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Legria HF G26 Seite 111

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info