Bedienungsanleitung Canon Legria HF G26 (Seite 116 von 146) (Englisch)

708912

116

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

Appendix: Menu Options Lists

116

[Notification Sounds]: A beep will accompany some of the camcorder's operations.

• While pre-recording (A 79) is activated, the camcorder will not emit any notification sounds.

[Powered IS Button]: Determines the operation mode of the assignable button set to [È Powered IS]

(A 52).

[Î Press and Hold]: Powered IS will be activated while you hold the button pressed down.

[Ï Toggle On/Off]: Each press of the button will turn the Powered IS function on and off.

[Set WB Priority]: Convenient for times when you need to use a particular white balance setting

frequently. You can press an assignable button set to [Ä WB Priority] to switch between the current

white balance and the white balance setting selected for [Set WB Priority].

[Focus Ring Direction]: Changes the direction the focus/zoom ring needs to be turned. This setting

affects the focus/zoom ring only when using it to adjust the focus (when the focus/zoom ring switch is

set to FOCUS).

[Focus Ring Response]: Selects the sensitivity of the response when operating the focus/zoom ring.

This setting affects the focus/zoom ring only when using it to adjust the focus (when the focus/zoom

ring switch is set to FOCUS).

[Focus Preset Speed]: Determines the speed at which the focus changes to the preset position.

[Auto Power Off]: In order to save power when the camcorder is powered by a battery pack, it will

automatically shut off if left without any operation for 5 minutes.

• Approximately 30 seconds before the camcorder shuts off, [Auto Power Off] will appear.

[Battery Info]: When you are using a battery pack that is compatible with Intelligent System, this option

displays a screen where you can verify the battery charge (as a percentage) and the remaining

recording time ( mode) or playback time ( mode).

• If the battery pack is exhausted, the battery information may not be displayed.

[HDMI Time Code]: When set to [i On], the HDMI signal output from the camcorder includes the

camcorder's time code.

[HDMI Status]: Displays a screen where you can verify the standard of the output signal from the HDMI

OUT terminal.

[Output Onscreen Displays]: When set to [i On], the camcorder’s onscreen displays will appear also

on the screen of a TV or monitor connected to the camcorder.

[Distance Units]: Selects the units to use for the focusing distance display while focusing manually. This

setting also affects units for GPS information when using the optional GP-E2 GPS Receiver.

[GPS Auto Time Setting]: When the optional GP-E2 GPS Receiver is attached to the camcorder, you

can have the camcorder automatically set the [Date/Time] setting based on the information acquired

from GPS. For more details, refer to

Setting Time from GPS on the Camera

in the receiver's instruction

manual.

[GPS Information Display]: When the optional GP-E2 GPS Receiver is attached to the camcorder, this

function allows you to view GPS information. For more details, refer to

Viewing GPS Information

in the

receiver's instruction manual.

[Certification Logo Display]: This displays select certification logos that apply to this camcorder.

• This setting may not be available depending on the country/region of purchase.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Legria HF G26 Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info