Bedienungsanleitung Canon Legria HF-G70 (Seite 117 von 135) (Englisch)

809442

117

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

Troubleshooting

117

Sound is distorted or is recorded at lower levels.

- When recording near loud sounds (such as fireworks, shows or concerts), sound may become

distorted or it may not be recorded at the actual levels. Activate the microphone attenuator

(A65), or adjust the audio recording level manually.

The picture is displayed correctly but there is no sound from the built-in speaker.

- Speaker volume is turned off. Adjust the volume (A92).

- During mode, sound from the built-in speaker will be muted if headphones are connected

to the camcorder.

SD Card and Accessories

Cannot insert the SD card.

- The SD card you are trying to insert is not facing the correct direction. Turn it over and insert it.

Cannot record on the SD card.

- A compatible SD card must be used (A27).

- Initialize the SD card (A29) when you use it with the camcorder for the first time.

- The SD card is full. Delete some recordings (A93) to free some space or replace the SD card.

The optional RC-V100 Remote Controller or commercially available remote control does not

work.

- Make sure that [System Setup] > [REMOTE Terminal] is set to [RC-V100 (REMOTE A)] when

using the optional RC-V100 Remote Controller or to [Standard] when using a commercially

available remote control.

- Turn off the camcorder, reconnect the remote controller and then turn the camcorder back on

again.

- When > [v% Camera Setup] > [/ Function] is set to [Off] or the currently

selected custom picture file is protected, detailed custom picture settings cannot be adjusted

using the RC-V100. Set [/ Function] to [On] after selecting a custom picture file that is not

protected (A80).

Connections with External Devices

Video noise appears on a nearby TV screen.

- When using the camcorder in a room where a TV is located, keep a distance between the USB

power adapter and the power or antenna cables of the TV.

Playback looks fine on the camcorder but there is no image on the external monitor.

-The camcorder is not connected correctly to the external monitor. Make sure the camcorder is

connected correctly (A97).

- The video input on the external monitor is not set to the video terminal to which you connected

the camcorder. Select the correct video input.

The camcorder is connected using the optional HTC-100 High Speed HDMI Cable, but there is

no picture or sound from the external monitor.

- Disconnect the High Speed HDMI cable and then restore the connection or turn the camcorder

off and then on again.

- The connected monitor is not compatible with the selected video configuration. Change the

video configuration to one that the monitor supports.

There is no image on the connected computer.

- The USB cable is connected to the camcorder’s DC IN terminal. Connect the USB cable to the

USB terminal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Legria HF-G70 Seite 117

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Legria HF-G70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info