Bedienungsanleitung Canon Legria HF M 400 (Seite 171 von 196) (Englisch)

456136

171

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

Additional Information  171

Do not disconnect the power source. Cannot write data with this connection. To write data to

the camcorder, connect the compact power adapter then reconnect the camcorder and

computer. Do not disconnect the USB cable unless you first use the computer to safely end

the connection.

- The camcorder cannot be operated while it is not being powered by the compact power

adapter and is connected to a computer with the supplied USB cable. In addition, scenes can-

not be written back and music files cannot be transferred to the camcorder. To avoid corrupt-

ing the data in the camcorder’s memory, use the computer’s Safely Remove Hardware

function to end the connection and disconnect the USB cable before using the camcorder.

- To be able to write back scenes and to transfer music files to the camcorder, use the com-

puter’s Safely Remove Hardware function to end the connection, disconnect the USB cable,

power the camcorder using the compact power adapter and only then connect it to the com-

puter again.

Do not disconnect the power source. Do not disconnect the USB cable unless you first use

the computer to safely end the connection.

- When the camcorder is in mode and is connected to the computer with the supplied

USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source

while this message appears may result in permanent loss of the recordings in the camcorder.

Use the computer's Safely Remove Hardware function to end the connection and disconnect

the USB cable before using the camcorder.

- To be able to write back scenes and to transfer music files to the camcorder, power the cam-

corder using the compact power adapter and only then connect it to the computer using the

supplied USB cable.

File name error

- The folder and file numbers have reached their maximum value. Set 88 [Photo Num-

bering] to [Reset] and delete all the photos on the memory card (0 119) or initialize it

(0 40).

Initialize only using the camcorder

- There is a problem with the file system that prevents accessing the selected memory. Initialize

the memory with this camcorder (0 40).

LCD Screen has been dimmed

-Hold h

pressed for 2 seconds to restore the LCD screen to its previous brightness set-

ting.

May not be possible to record movies on this memory card

- You may not be able to record movies on a memory card without a Speed Class rating.

Replace the memory card with one rated SD Speed Class 2, 4, 6 or 10.

Mem. Card Number of scenes already at maximum

- The memory card already contains the maximum number of scenes (3,999 scenes); no further

scenes can be copied onto the memory card. Delete some scenes (0 57) to free some

space.

COPY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Legria HF M 400 Seite 171

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Legria HF M 400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info