Bedienungsanleitung Canon Legria HFM406 (Seite 165 von 187) (Englisch)

479075

165

Zoom out

Zoom in

Vorherige Seite

1/187

Nächste Seite

Additional Information  165

Number of stories already at maximum

- The gallery already contains the maximum number of stories (98 stories in any one given

memory). Delete some stories (0 56) or change the recording memory for movies (0 36).

Recording program: Underwater / Surface

Turn on the camcorder while holding the zoom lever toward T or W to change the recording

program r

Xs.

- Follow the instructions to switch the recording program between [Underwater] and [Surface]

while the camcorder is secured inside the optional WP-V3 Waterproof Case.

Scene recorded using another device. Cannot divide the scene.

- Scenes that were not recorded with this camcorder cannot be divided with this camcorder.

Scene recorded using another device. Cannot play back the scene.

- Scenes that were not recorded with this camcorder cannot be played back.

Select the desired scene number

- A number of scenes have the same recording date but different file control information. This

can occur for example when you edit photos and write the files back to the camcorder. Select

a number to display the corresponding group of scenes.

Some scenes could not be converted

- Some scenes selected for conversion to SD were recorded using another device and then

transferred to a memory card connected to the computer. These scenes were not converted.

- Among the scenes selected for conversion to SD there are scenes recorded with another

device using 24p frame rate and then transferred to a memory card connected to the com-

puter. When converting scenes to SD, leave out scenes recorded using another devices.

Some scenes could not be deleted

- Movies that were protected/edited with other devices and then transferred to a memory card

connected to the computer, cannot be deleted with this camcorder.

Some scenes were recorded using another device and cannot be copied.

- Scenes that were not recorded with this camcorder cannot be copied to memory card Y.

Task in progress. Do not disconnect the power source.

- The camcorder is updating the memory. Wait until the operation ends and do not disconnect

the compact power adapter or remove the battery pack.

There are no scenes with the selected rating

- No scenes have been rated yet. Rate the scenes as you like (0 68).

- The criteria you used to select scenes by rating resulted in no applicable scenes. Change the

criteria used to select scenes by rating.

This memory card contains scenes. Delete all scenes to use relay recording.

- Save your movies (0 123) if necessary, and delete all the movies from the memory card

(0 54).

This photo cannot be displayed

- You may not be able to display photos taken with other devices or image files created or

edited on a computer and then transferred to a memory card connected to the computer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Legria HFM406 Seite 165

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Legria HFM406

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info