475898
22
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
22
The preparation display will disappear after 30
seconds.
(See page 60 for Lamp mode status.)
Turning On the Projector
Connect the projectors AC power cord into an AC
outlet. The POWER indicator lights red.
Press the POWER button on the remote controller or
on the top control. The POWER indicator lights green
and the cooling fans start to operate. The preparation
display appears on the screen and the countdown
starts.
2
3
1
4
After the countdown, the input source that was
selected the last time and the Lamp mode status icon
(See page 60) appear on the screen.
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
Selected Input Source and Lamp mode
Note:
When the Logo select function is set to Off, the logo will
not be shown on the screen. (p.55)
When Countdown off or Off is selected in the Display
function, the countdown will not be shown on the screen.
(p.55)
During the countdown period, all operations are invalid.
When the Auto input function is set to On 2, the input
signal will be searched automatically. (p.53)
When Off is selected in the Display function, the Video
/PC selection window and the input signal guidance
window are not shown on the screen. (p.55)
Note:
The Filter warning and Lamp replacement
icons may appear on the screen depending
on the usage state of the projector.
Basic Operation
If there is no signal input when start on the projector,
or the current signal is missed while operating the
projector, the Video / PC selection window will be
displayed on the screen, please move the pointer
to input source desired by pressing the Point 
buttons and press the OK button. And then follow the
input signal guidance window to correct the signal and
connection.
If the projector is locked with a PIN code, PIN code
input dialog box will appear. Enter the PIN code as
instructed on the next page.
5
Video / PC selection window
Video / PC selection window
Input signal guidance window
Input signal guidance window
Lamp mode status
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon LV-8235UST wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info