Bedienungsanleitung Canon LV-X320 (Seite 20 von 80) (Englisch)

615747

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Obtaining a preferred projected image size

The distance from the projector lens to the screen, the zoom setting (if available), and the video format

each factors in the projected image size.

4:3 is the native aspect ratio of LV-X320/LV-X310ST. To be able to project a complete 16:9 (widescreen)

aspect ratio image, the projector can resize and scale a widescreen image to the projector's native aspect

width. This will result in a proportionally smaller height equivalent to 75% of the projector's native aspect

height.

Thus, a 16:9 aspect image will not utilize 25% of the height of a 4:3 aspect image displayed by this

projector. This will be seen as darkened (unlit) bars along the top and bottom (vertical 12.5% height

respectively) of the 4:3 projection display area whenever displaying a scaled 16:9 aspect image in the

vertical center of the 4:3 projection display area.

16:10 is the native aspect ratio of LV-WX320/LV-WX310ST. To be able to project a complete 16:9

(widescreen) aspect ratio image, the projector can resize and scale a widescreen image to the projector's

native aspect width. This will result in a proportionally smaller height equivalent to 90% of the projector's

native aspect height.

Thus, a 16:9 aspect image will not utilize 10% of the height of a 16:10 aspect image displayed by this

projector. This will be seen as darkened (unlit) bars along the top and bottom (vertical 5% height

respectively) of the 16:10 projection display area whenever displaying a scaled 16:9 aspect image in the

vertical center of the 16:10 projection display area.

The projector should always be placed horizontally level (like flat on a table), and positioned directly

perpendicular (90° right-angle square) to the horizontal center of the screen. This prevents image

distortion caused by angled projections (or projecting onto angled surfaces).

The modern digital projector does not project directly forward (like older style reel-to-reel film projectors

did). Instead, digital projectors are designed to project at a slightly upward angle above the horizontal

plane of the projector. This is so that they can be readily placed on a table and will project forward and

upwards onto a screen positioned so that the bottom edge of the screen is above the level of the table (and

everyone in the room can see the screen).

You can see from the diagram on page 23, that this type of projection causes the bottom edge of the

projected image to be vertically offset from the horizontal plane of the projector.

If the projector is positioned further away from the screen, the projected image size increases, and the

vertical offset also increases proportionately.

When determining the position of the screen and projector, you will need to account for both the projected

image size and the vertical offset dimension, which are directly proportional to the projection distance.

When fine streaks are seen on projected images

This is due to interference with the screen surface and is not a mal-function. Replace the screen or

displace the focus a little.

4:3 aspect image in a 4:3 aspect display

area

16:9 aspect image scaled to a 4:3 aspect

display area

4:3 aspect image in a 16:10 aspect display area 16:9 aspect image scaled to a 16:10 aspect

display area

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon LV-X320 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon LV-X320

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info