Bedienungsanleitung Canon lv x7 (Seite 15 von 83) (Englisch)

214646

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

. Introduction

Top Features

BACK

KEYSTONE

WARNING

AUTO PC

INPUT

VOL

LAMP

5 8

. POWER Button ( )

Use this button to turn the power on and off when

the main power is supplied and the projector is in

standby mode.

To turn on the projector, press and hold this button

for about 1 second. To turn off the projector, press

this button twice.

2. POWER Indicator

When this indicator is green, the projector is on; when

this indicator is orange, it is in standby mode. See the

Power Indicator section on page 61 for more details.

3. WARNING Indicator

If this light blinks red rapidly, it indicates that an error

has occurred, the lamp cover is not attached properly

or the projector has overheated. If this light remains

orange, it indicates that you have pressed a cabinet

key while the Key lock is enabled. See the WARNING

Indicator section on page 61 for more details.

. LAMP Indicator

If this light blinks red rapidly, it's warning you that

the lamp has reached the end of its usable life. After

this light appears, replace the lamp as soon as pos-

sible (See page 58). If this is lit green continually, it

indicates that the lamp mode is set to Quiet. See the

Lamp Indicator section on page 61 for more details.

5. INPUT Button

SelectingfromINPUTList

Press and quickly release the INPUT button to dis-

play the INPUT list. Each time the INPUT button is

pressed, the input source will change as follows:

Computer 1* → Computer 2 (Digital)* → Computer 2

(Analog)* → VIDEO → S-VIDEO → Computer 1* → ...

To display the selected source, press the OK button

or allow 2 seconds to elapse.

DetectingtheSignalAutomatically

Press and hold the INPUT button for a minimum

of 2 seconds, the projector will search for the next

available input source. Each time you press and

hold the INPUT button for a minimum of 2 seconds,

the input source will change as follows:

Computer 1* → Computer 2 (Digital)* → Computer 2

(Analog)* → VIDEO → S-VIDEO → Computer 1* → ...

LV-7260/LV-X7: Computer → VIDEO → S-VIDEO

→ Computer → ...

6. AUTO PC Button

Use this button to adjust an analog RGB source for

an optimal picture. See page 31.

7. MENU Button

Displays the menu. See page 40, 41.

8. SELECT

/ VOL (+/–) Buttons

See page 40.

: Use these buttons to select the menu of the

item you wish to adjust.

When no menus appear, these buttons work

as a keystone control. See page 29.

: Use these buttons to change the level of a

selected menu item. A press of the but-

ton executes the selection. When no menus

appear, these buttons work as a volume

control. See page 31.

9. OK Button

Executes your menu selection and activates items

selected from the menu.

0. BACK Button

Pressing this button will return to the previous

menu.

While you are in the main menu, pressing this but-

ton will close the menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon lv x7 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info