Bedienungsanleitung Canon LV7297M (Seite 38 von 84) (Englisch)

536749

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite



Select . The On-Screen Menu

disappears and  appears. Press the

OK button to expand the image size. Use the

Point ▲▼◄► buttons to pan the image. The

Panning function can work only when the image

is larger than the screen size. A projected image

can be also expanded by pressing the D.ZOOM

 or the OK button on the remote control unit.

To exit the Digital zoom +/– mode, press any

button except the D.ZOOM  buttons, OK and

Point buttons.



Select . The On-Screen Menu

disappears and  appears. Press the

OK button to compress image size.

The projected image can be also compressed by

pressing the D.ZOOM  or the OK button on the

remote control unit.



To return to the previous screen size, select a

screen size from the Screen Size Adjustment

Menu or select an input source from the Input

Source Selection Menu (see page 30) again,

or adjust the screen size with the D.ZOOM 

buttons.



• The minimum compression ratio is limited

depending on the input signal, when the Keystone

function is working or when the custom is selected

for the screen size.

• True and    are disabled and

cannot be displayed when , 575i,  

,1035i or  is selected in the PC System

Menu (p.31).

•  cannot be selected when True is

selected.

• The minimum compression ratio is limited at

Normal screen size.

LV -RC06











When this function is set to On, the picture

will be top/bottom and left/right reversed. This

function is used to project the image from a

ceiling-mounted projector.

Ceiling

When this function is set to On, the picture will

be left/right reversed. This function is used to

project the image from rear of the screen.

Rear

To reset the adjusted data, select Reset and

press the

OK button. A confirmation box appears and then

select Yes. All adjustments will return to their

previous figures.

Reset



This function is used to adjust keystone

distortion of the projected image. Use the Point

▲▼ buttons to choose the item you want to

adjust.



To correct keystone distortion, press the OK

button.

Keystone appears on the screen. Use the

Point ▲▼ buttons to correct keystone

distortion (p.26).



To store or reset the keystone correction,

press the Point ► button.

 .......... Keep the keystone correction

even when the AC power cord

is plugged out or turned off the

projector.

Reset .......... Release the keystone correction

when the AC power cord is

plugged out.



Ceiling

Rear

Press the OK button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon LV7297M Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info