Bedienungsanleitung Canon LV8227A (Seite 70 von 84) (Englisch)

536747

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

  – Solutions

  – Plug the power cord of the projector into the AC outlet.

– See if the POWER indicator lights red.

– Wait until the POWER indicator stops blinking to turn on the

projector again. The projector can be turned on after the

POWER indicator turns red. See page 21.

– Check the WARNING indicator. If the WARNING indicator lights

red, projector cannot be turned on. See page 70.

– Check the projection lamp. See page 68.

– Unlock the Key lock function for the projector. See page 60.

– Make sure  or  are not chosen at display

function. See page 53.

– Make sure User or  are not chosen at Logo (select)

function. See page 53.



– Make sure Auto input function is adjusted properly.



See page 52.



– That is the Filter warning icon. See page 60.





.

 – That is the Lamp replacement icon or the Filter warning icon.

See page 68 or 60.

 – Adjust focus of the projector. See page 26.

– Provide proper distance between the projector and the

projection screen. See page 15.

– Check the projection lens to see if it needs cleaning.

See page 67.

– Moving the projector from a cool to warm place may result in

moisture condensation on the projection lens. In such cases,

leave the projector off and wait until condensation evaporates.

 – Check the Ceiling/Rear function. See pages 38,40,48,50.

 – Check the Ceiling function. See pages 38,40,48,50.

 – Check if the  or  is adjusted properly.

See pages 36, 45.

– Check if  is selected properly. See pages 35,44.

– Check the Lamp mode function. See pages 28, 59.

– Check the LAMP REPLACE indicator. If it lights, the end of lamp

life is approaching. Replace the lamp with a new one promptly.

See page 68.

Before calling your dealer or service center for assistance, check the items below once again.

– Make sure you have properly connected the projector to peripheral equipment as described on

pages 17-19.

– Make sure all equipment is connected to AC outlet and the power is turned on.

– When the projector does not project an image from the connected computer, restart the computer.





Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon LV8227A Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info