Bedienungsanleitung Canon LX-MU600Z (Seite 19 von 116) (Englisch)

709683

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Warning

Pay attention to the following points regarding installation and handling of the projector. Failure to do

so may cause a re, electric shock or personal injury.

■ Do not remove the cabinet from the projector or disassemble it. The interior of the projector

contains high-voltage components as well as parts that are hot. If inspection, maintenance or

repair is required, contact the Canon Customer Support Center.

■ Do not disassemble or modify the projector or the remote control.

■ Do not look directly into the exhaust vents during use.

■ Do not insert any object into vents in the projector, such as the air intake vent or exhaust vents.

■ Do not place a pressurized can in front of the exhaust vents. The pressure of the contents of the

can may increase due to heat from the exhaust vents and this could result in an explosion.

■ Using the lens shift function the lens in the projector moves up / down / left / right powered by a

motor. Do not touch the lens when the lens is moving. Doing so could cause a personal injury.

■ Before replacing the lens unit, make sure the projector is turned off to allow the projector to cool

thoroughly. Failure to do so could result in a burn or injury.

■ When cleaning off dust or dirt from the projector lens etc., do not use any kind of spray that is

ammable.

■ As strong light beams are emitted while the projector is in use,

do not look directly into the projector lens. Doing so could cause

an eye injury. Pay particular attention to prevent small children

from doing so.

■ When setting the projector on a high surface for projection, be sure the surface is at and stable.

■ For ceiling mounting precautions, refer to the installation manual included with the ceiling mount

(sold separately).

■ When hanging the projector from a ceiling, put the projector down on the oor or a workbench

before attaching or replacing the lens unit. Failure to do so could result in parts falling off the

projector and may cause an accident or personal injury.

Warning

Precautions for the Batteries of the Remote Control

Pay attention to the following points regarding handling of batteries. Failing to do so could result in a

re or personal injury.

■ Do not heat, short circuit or disassemble the batteries, or place them in a re.

■ Do not attempt to recharge the batteries that are included with the remote control.

■ Remove the batteries when they are at or when the remote control will not be used for a long

period of time.

■ When replacing the batteries, replace both at the same time. Also, do not use two batteries of a

different type at the same time.

■ Insert the batteries with the + and - terminals in the correct directions.

■ If any liquid from inside the batteries leaks out and contacts your skin, be sure to wash the liquid

off thoroughly.

RG2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon LX-MU600Z Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon LX-MU600Z

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info