Bedienungsanleitung Canon LX-MW500 (Seite 27 von 85) (Englisch)

709680

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

ENGLISH

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the

MONITOR-OUT signal output jack on the projector to an external monitor.

To connect the projector to a monitor:

1. Take the supplied Computer cable and connect one end to the D-Sub output terminal of the computer.

2. Connect the other end of the Computer cable to the COMPUTER-1 signal input terminal of the

projector.

3. Take another Computer cable and connect one end to the monitor and the other end to the

MONITOR-OUT output terminal of the projector.

4. If you wish to make use of the projector speaker in your presentations, take a suitable audio cable and

connect one end of the cable to the audio output terminal of the computer, and the other end to the

AUDIO IN terminal of the projector.

5. If you wish, you can use another suitable audio cable and connect one end of the cable to the AUDIO

OUT terminal of the projector, and the other end to your external speakers (not supplied).

Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See

"Adjusting the sound" on page 47 for details.

The final connection path should be like that shown in the following diagram:

Images may not be displayed correctly depending on the type of the input signal and the type of the

cable.

Connecting Video source devices

You can connect your projector to various Video source devices that provide any one of the following

output sockets:

• HDMI/MHL

• Component Video

•S-Video

• Video (composite)

You need only connect the projector to a Video source device using just one of the above connecting

methods, however each provides a different level of video quality. The method you choose will most

likely depend upon the availability of matching terminals on both the projector and the Video source

device as described below:

HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between

compatible devices like DTV tuners, DVD players and displays over a single cable. It provides pure

digital viewing experience. See "Connecting an HDMI device" on page 28 for how to connect the

projector to an HDMI device.

Digital TV tuner and DVD players output Component Video natively, so if available on your devices, this

should be your connection method of choice in preference to (composite) Video. See "Connecting a

Component Video source device" on page 29 for how to connect the projector to a component video

device.

If you have both composite Video and S-Video output terminals on your Video source device, you should

elect to use the S-Video option. See "Connecting an S-Video source device" on page 30 for how to

connect the projector to an S-Video device.

Notebook or desktop computer

Computer cable (supplied)

Audio cable (option)

Speakers

Monitor

Computer cable

Audio

cable

(option)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon LX-MW500 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon LX-MW500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info