Bedienungsanleitung Canon LX-MW500 (Seite 39 von 85) (Englisch)

709680

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

ENGLISH

Correcting keystone

Keystoning refers to the situation where the projected image becomes a trapezoid due to angled

projection.

To correct this, besides adjusting the height of the projector, you will

need to manually correct it following one of these steps.

• Press / on the projector or remote control to display the

Keystone correction page. Press to correct keystoning at the

top of the image. Press to correct keystoning at the bottom of

the image. Press to correct keystoning at the left side of the

image. Press to correct keystoning at the right side of the image.

• Using the OSD menu

1. Press MENU and then press / until the DISPLAY menu is

highlighted.

2. Press to highlight Keystone and press OK/IMAGE. The

Keystone correction page is displayed.

3. Press to correct keystoning at the top of the image or press

to correct keystoning at the bottom of the image. Press to

correct keystoning at the left side of the image. Press to

correct keystoning at the right side of the image.

• You can correct the vertical and horizontal keystones. However, their adjustment ranges are

limited in such correction.

• When the keystone adjustment is carried out, the adjustment value is indicated. Note that this

value doesn’t mean a projection angle.

• The allowable range of the adjustment value in the keystone adjustment varies depending on

the installation conditions.

• Images may not be projected in a shape of a regular rectangle or with its aspect ratio 4:3,

depending on the installation conditions of the projector and the screen.

• When the keystone adjustment takes effect, the resolution decreases. In addition, stripes may

appear or straight lines may bend in images with complicated patterns. They are not due to

product malfunctions.

• Noise may appear on the screen during the keystone adjustment because of the type of the

video signal being projected and the setting values of the keystone adjustment. In such cases,

set the keystone adjustment values in the range where the image is displayed without noise.

• When the keystone adjustment is carried out, the image may not be displayed correctly

because of the type of input signal.

Correcting corner distortion

This function allows you to correct each distorted image corner to get a perfect

rectangular image. You can manually adjust four corners of the image by setting

the horizontal and vertical values.

1. Press MENU and then press / until the DISPLAY menu is

highlighted.

2. Press to highlight Corner Adjustment and press OK/IMAGE. The

Corner Adjustment correction page is displayed.

3. Press / / / to select one corner and press OK/IMAGE.

4. Press / to adjust vertical values.

5. Press / to adjust horizontal values.

6. After one corner is adjusted, press MENU to return to the Corner Adjustment correction page.

7. You can press / / / to select another corner and repeat step 4-7 to make more adjustments.

Press /.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon LX-MW500 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon LX-MW500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info