Bedienungsanleitung Canon ME20F-SH (Seite 24 von 78) (Englisch)

615741

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Preparing the Camera

NOTES

• About using an EF-S lens: This camera’s sensor is larger than the sensor size for which EF-S

lenses are designed (APS-C). When using EF-S lenses with this camera, you may notice peripheral

illumination fall-off or vignetting. To prevent this, you can use the [Camera Setup] > [EF-S Lens]

setting to change the sensor area that is used for producing the image. This setting digitally

enlarges the image by a factor of approx. 1.48 so the image quality will deteriorate.

• Depending on the lens's characteristics, the corners of the picture may seem darker due to light fall-

off or illumination drop. You can use the [Camera Setup] > [Periph.Illum.Corr.] setting to have the

camera compensate if it has the correction data available for the lens.

• If you are using a compatible lens, you can use the [Camera Setup] > [Zoom-Iris Correct.] setting

to have the camera adjust the aperture while zooming.

Peripheral Illumination Correction

Depending on the characteristics of the lens used, the image around the corners of the picture may

seem darker due to light fall-off or peripheral illumination drop. If the camera has correction data

available for the EF lens used, it can apply this correction data to compensate as necessary.

1 Attach the lens you want to use.

2 Open the peripheral illumination correction screen.

[Camera Setup] > [Periph.Illum.Corr.]

• If correction data is available, the lens model name will

appear on the screen.

• If correction data is not available, [Periph.Illum.Corr.] will

appear grayed out. Visit your local Canon Web site and

check if there is correction data available for the lens you

are using. If so, download the necessary update package and upgrade the camera's firmware

following the instructions supplied therein.

3 Select [On] and then press the joystick.

• As long as [Camera Setup] > [Periph.Illum.Corr.] is set to [On], the camera will automatically

apply the appropriate correction data.

NOTES

• No correction will be applied in the following cases:

- When correction data is not available for the attached lens.

- When using non-Canon lenses. Even if the [Periph.Illum.Corr.] setting is available (not grayed out),

setting it to [Off] is recommended.

• About lens correction data:

- The camera contains a register of correction data for most compatible lenses that were available

at the time the camera went on sale. Correction data for future lenses will be made available as

part of the regular updates released for the camera's firmware. For more details, visit your local

Canon Web site.

- Depending on the shooting conditions, noise may appear in the periphery of the image as a result

of the correction.

- The level of correction will be lower for lenses that cannot provide distance information.

- The level of correction will be lower the higher the gain setting used.

[Camera Setup]

[Periph.Illum.Corr.]

[Off]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon ME20F-SH Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon ME20F-SH

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info