Bedienungsanleitung Canon MF4450 Image Class (Seite 17 von 164) (Englisch)

467374

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

Installation Requirements and Handling

In order to use this machine in a safe and trouble-free manner, install the machine in a place that fulfills the following conditions.

Also, read the remarks carefully.

Temperature and Humidity Conditions

• Temperature range: 50 to 86°F (10 to 30°C)

• Humidity range: 20 to 80 % RH (no condensation)

IMPORTANT

Protecting the machine from condensation

• To prevent condensation from forming inside the machine

in the following cases, let the machine adjust to the

ambient temperature and humidity for at least two hours

before use.

- When the room where the machine is installed is heated

rapidly

- When the machine is moved from a cool or dry location

to a hot or humid location

• If water droplets (condensation) form inside the machine,

this can result in paper jams or poor print quality.

When using an ultrasonic humidifier

When you are using an ultrasonic humidifier, it is therefore

recommended that you use purified water or other water that

is free of impurities.

If you use tap water or well water, impurities in the water will

be dispersed through the air. This can be trapped inside the

machine, causing degradation in print quality.

Power Supply Requirements

120 to 127 V, 60 Hz

IMPORTANT

Precautions when connecting the power cord

• Do not connect this machine to an uninterruptible power

source.

• Use an AC power outlet exclusively for the machine. Do not

use the other sockets of the AC power outlet.

• Do not plug the power plug into the auxiliary outlet on a

computer.

Do not use the same AC power outlet for both the machine

and any of the following equipment.

- Copy machine

- Air conditioner

- Shredder

- Equipment that consumes a large amount of electricity

- Equipment that generates electrical noise

• When unplugging the power cord, keep interval of 5

seconds or more before plugging it again.

Miscellaneous precautions

• The maximum power consumption of the machine is

1,090 W or less.

• Electrical noise or a dramatic drop in supplied voltage may

cause the machine or computer to operate incorrectly or

lose data.

Installation Requirements

• A location with sufficient space

• A location with good ventilation

• A location with a flat, even surface

• A location able to fully support the weight of the machine

IMPORTANT

Do not install the machine in the following locations, as

this may result in damage to the machine.

• A location subject to dramatic changes in temperature or

humidity

• A location subject to condensation

• A poorly ventilated location

(If you use the machine for a long time or to perform a large

amount of printing in a poorly ventilated room, the ozone

or other odors generated by the machine may create an

uncomfortable working environment. In addition, chemical

particles are dispersed during printing; therefore, it is

important to provide adequate ventilation.)

• A location near equipment that generates magnetic or

electromagnetic waves

• A laboratory or location where chemical reactions occur

• A location exposed to salt air, corrosive gases, or toxic gases

• A location, such as on a carpet or mat, that may warp from

the weight of the machine or where the machine is liable

to sink.

Installation Space

Required installation space

MF4570dn

31 5/8" (804 mm)

4" (100 mm)

(100 mm)

24 1/4"

(617 mm)

29"

(735 mm)

4" (100 mm)

Paper

cassette

Feeder

cover

MF4450

30 7/8" (783.1 mm)

4" (100 mm)

24 1/4

(616.2 mm)

4" (100 mm)

29"

(734.7 mm)

(100 mm)

Feeder

cover

Paper

cassette

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon MF4450 Image Class Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info