Bedienungsanleitung Canon MF4450 Image Class (Seite 107 von 164) (Englisch)

467374

107

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

6-23

Using the Fax Functions

Incoming Ring

Specify whether or not the external telephone will ring

during an incoming call if <RX Mode> is set to <Auto> or

<Fax/Tel Auto Switch>.

You can also specify the number of ringing times.

After the external telephone rings for specified times, the

machine automatically starts receiving when receiving a

fax. When receiving a call, only when <RX Mode> is set to

<Fax/Tel Auto Switch>, the machine’s speaker rings.

How to display the settings

[ ] (Menu) → <Fax RX Settings> → <Fax Settings>

→ <Incoming Ring>

Settings

(Boldface: Default settings)

Off

The telephone does not ring

during an incoming call.

Ring Times: 1 to 2 to 99

(times)

The telephone rings during an

incoming call.

You can specify the number of

ringing times in <Ring Times>.

Remote RX

If an external telephone is connected, you can switch to the

fax receiving mode immediately by dialing the ID number

for fax receiving using the dial buttons of the telephone

during a phone call.

How to display the settings

[ ] (Menu) → <Fax RX Settings> → <Fax Settings>

→ <Remote RX>

Settings

(Boldface: Default settings)

Off Remote receiving is disabled.

Remote RX ID:

00 to 25 to 99

Remote receiving is enabled.

You can specify an ID number for fax

receiving in <Remote Receive ID>.

Auto RX Switch

Specify how long an incoming call should ring before the

machine automatically switches to fax mode. This option is

available when the <RX Mode> is set to <Manual>.

How to display the settings

[ ] (Menu) → <Fax RX Settings> → <Fax Settings>

→ <Auto RX Switch>

Settings

(Bold: Default settings)

Off

The machine will not

automatically switch to fax

mode.

Incoming Ring Time: 1

to 15 to 99 (seconds)

The machine will

automatically switch to fax

mode after the specified

period.

System Settings Procedure

Specify the system settings using the following procedure.

This section describes the procedure for changing the setting

for “TX Start Speed” as an example.

Keys to be used for this operation

1 Press [ ] (Menu).

2 Press [ ] or [ ] to select <System Management

Settings>, and then press [OK].

Fax TX Settings

Fax RX Settings

Adjustment/Maintena...

System Management Se

When the system manager PIN is specified

Enter the system manager PIN.

“Text Input Method” (→P.1-9)

When you are finished entering, press[ ] or [ ] to select <Apply>,

and then press [OK].

System Manager PIN

*******

<Apply>

1 2 3 4 5 6 7 8 9 0

<BS>

3 Press [ ] or [ ] to select <Communication

Management Settings>, and then press [OK].

System Settings

System Manager Info

...

Device Information

...

Network Settings

Communication Manage

4 Press [ ] or [ ] to select <Fax Settings>, and

then press [OK].

Communication Mgt. Set

Fax Settings

Memory Lock Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon MF4450 Image Class Seite 107

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info