Bedienungsanleitung Canon Pixma G3460 - Mac (Seite 240 von 334) (Englisch)

745477

240

Zoom out

Zoom in

Vorherige Seite

1/334

Nächste Seite

Check2

Is the printer connected to the wireless router?

Use the icon on the LCD when COPY button, SCAN button, or Setup button is pressed to check the

connection status between the printer and wireless router. If the icon is not displayed, Wi-Fi is disabled.

Turn on wireless communication on the printer.

Check3

Make sure the printer and wireless router network settings match.

Make sure the network settings of the printer (e.g. network name (SSID) or network key (password), etc.) are

identical with those of the wireless router.

Communication with a wireless router must be tuned to either the 2.4 GHz or 5 GHz frequency band. The

network name (SSID) of the 2.4 GHz frequency band and the network name (SSID) of the 5 GHz frequency

band cannot be used in combination.

Check the network name (SSID) set for the printer, and match it with the network name (SSID) of the correct

frequency band of the Wi-Fi router.

To check the settings of the wireless router, refer to the instruction manual provided with it or contact its

manufacturer.

To check the current network settings of the printer, print out the network setting information of the printer.

Printing Network Settings

Check4

Make sure the printer is not placed too far away from the wireless router.

If the distance between the printer and wireless router is too far, wireless communication becomes poor. Place

the printer and wireless router close to each other.

Check5

Make sure wireless signal is strong. Monitor signal status and move printer

and wireless router as necessary.

Place the printer and wireless router where there are no obstacles between them. Wireless communication

between different rooms or floors is generally poor. Wireless communication can be impeded by building

materials containing metal or concrete. If the printer cannot communicate with the computer over a Wi-Fi due

to a wall, place the printer and the computer in the same room.

In addition, if a device like a microwave oven that emits radio waves of the same frequency bandwidth as a

wireless router is nearby, it may cause interference. Place the wireless router as far away from interference

sources as possible.

Check the signal strength on the LCD.

LCD and Operation Panel

Check6

Make sure of the Wi-Fi channel numbers used for your computer.

You need to have the same Wi-Fi channel number that you are using for the wireless router as your computer.

It is normally set in the way that you can use all the Wi-Fi channels. However, when the channels that you are

using are restricted, the Wi-Fi channels do not match.

See the instruction manual provided with your computer and check the Wi-Fi channel number available for

your computer.

Check7

Make sure channel set on wireless router is a usable channel as confirmed in

the previous check.

240

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Pixma G3460 - Mac Seite 240

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Pixma G3460 - Mac

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info