Bedienungsanleitung Canon Pixma iX6850 (Seite 417 von 497) (Englisch)

542906

417

Zoom out

Zoom in

Vorherige Seite

1/497

Nächste Seite

Make sure that a port named "USBnnn" (where "n" is a number) with "Canon XXX" appearing in the

Printer column is selected for Print to the following port(s).

Note

•

When the printer is used over LAN, the port name of the printer is displayed as

"CNBJNP_xxxxxxxxxx". "xxxxxxxxxx" is the character string generated from the MAC address or a

character string specified by the user when setting up the printer.

•

If the setting is incorrect:

Reinstall the printer driver with the Setup CD-ROM or install it from our website.

•

Printing does not start even though the printer is connected to the computer using a USB cable and

the port named "USBnnn" is selected:

In Windows 8, select My Printer on the Start screen to start My Printer. If My Printer is not

displayed on the Start screen, select the Search charm, then search for "My Printer".

Set the correct printer port on Diagnose and Repair Printer. Follow the on-screen instructions to

set the correct printer port, then select your printer's name.

In Windows 7, Windows Vista, or Windows XP, click Start and select All programs, Canon

Utilities, Canon My Printer, Canon My Printer, then select Diagnose and Repair Printer. Follow

the on-screen instructions to set the correct printer port, then select your printer's name.

If the problem is not resolved, reinstall the printer driver with the Setup CD-ROM or install it from our

website.

•

Printing does not start even though the port named "CNBJNP_xxxxxxxxxx" is selected when the

printer is used over LAN:

Launch IJ Network Tool, and select "CNBJNP_xxxxxxxxxx" as you confirmed in step 4, then

associate the port with the printer using Associate Port in the Settings menu.

If the problem is not resolved, reinstall the printer driver with the Setup CD-ROM or install it from our

website.

Check3

Make sure that the printer is connected to your computer properly.

When the printer is connected to your computer with a USB cable, make sure that the USB cable is securely

plugged in to the printer and the computer, then check the followings:

• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the

computer, and try printing again. If printing starts normally, there is a problem with the relay device.

Consult the reseller of the relay device for details.

• There could also be a problem with the USB cable. Replace the USB cable and try printing again.

When you use the printer over LAN, make sure that the printer is connected to the network with a LAN cable

or is set up correctly.

Check4

Make sure that the printer driver is installed correctly.

Uninstall the printer driver following the procedure described in Deleting the Unnecessary Printer Driver, then

reinstall the printer driver with the Setup CD-ROM or reinstall it from our website.

Check5

When the printer is connected to your computer with a USB cable, check the

status of the device on your computer.

Follow the procedure below to check the status of the device.

1. Open the Device Manager on your computer as shown below.

417

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Pixma iX6850 Seite 417

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Pixma iX6850

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info