Bedienungsanleitung Canon PIXMA MG7540 (Seite 42 von 1049) (Englisch)

574436

Zoom out

Zoom in

Vorherige Seite

1/1049

Nächste Seite

Restrictions

When connecting another device while a device (such as a smartphone) is already connected to the

printer, connect it using the same connection method as the connected device.

If you connect using a different connection method, the connection to the device in use will be disabled.

Connection Using a Wired Network cannot be performed on printers that do not support a wired

connection.

Connection Using an Access Point

• Make sure that a device and an access point (or wireless network router) are connected. For details

on how to check the settings, refer to the manual supplied with the access point or contact its

manufacturer.

As for a device already connected to the printer without using an access point, reconnect it via an

access point.

• The configuration, router functions, setup procedures and security settings of the network device vary

depending on your system environment. For details, refer to the manual of your network device or

contact its manufacturer.

• Check if your device supports IEEE802.11n (2.4 GHz), IEEE802.11g or IEEE802.11b.

• If your device is set to the "IEEE802.11n only" mode, WEP or TKIP cannot be used as a security

protocol. Change the security protocol for your device to something other than WEP and TKIP or

change the setting to something other than "IEEE802.11n only."

The connection between your device and the access point will be temporarily disabled while changing

the setting. Do not operate the screen of this guide until the setup is complete.

• For office use, consult your network administrator.

• Take added care when connecting to a network that is not protected with security measures, as there

is a risk of disclosing data such as your personal information to a third party.

Connection without Using an Access Point

Important

• If you connect a device connected to the Internet via an access point to the printer that is in access

point mode, the connection between the device and access point will be disabled. In that case, the

connection of the device may switch to a mobile data connection automatically depending on your

device. When you connect to the Internet using a mobile data connection, charges may apply

depending on your contract.

• When you connect a device and the printer in access point mode, the connection information will

be saved to Wi-Fi settings. The device may be connected to the printer automatically even after

disconnecting it or connecting it to another access point.

• You cannot connect to an access point and the printer that is in access point mode at the same

time. If you have an access point, it is recommended that you use the access point to connect to

the printer.

• To prevent automatic connection to the printer that is in access point mode, change the

connection mode after using the printer, or set not to connect automatically in the Wi-Fi settings

of the device.

For details on how to change the settings of a device, refer to the manual supplied with the

device or contact its manufacturer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon PIXMA MG7540 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon PIXMA MG7540

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info