596294
1121
Zoom out
Zoom in
Vorherige Seite
1/1135
Nächste Seite
2.
Click the Advanced settings.
If the User Account Control screen is displayed, click Yes.
3.
Right-click Inbound Rules, then select New Rule.
If you set outbound rules, right-click Outbound Rules.
4.
Select Port, then click Next.
5.
Select TCP, then select Special local ports: and input "137", then click
Next.
If you open UDP ports, select UDP.
If you open other ports, input the other port's number in Specific local ports:.
6.
Select Allow the connection, then click Next.
7.
Choose the profile for which this rule applies, then click Next.
8.
Input any name and description, then click Finish.
9.
Repeat steps 3 to 8 to open the other ports (138TCP, 138UDP, 139TCP,
and 139UDP).
10.
Confirm that the port names are added on the Inbound Rules screen,
then close Windows Firewall.
If you are using any operation system other than Windows 7:
1.
Click Start > Control Panel > Security > Windows Firewall > Change
settings.
In Windows XP, click Start > Control Panel > Security Center > Windows Firewall.
2.
Click the Exceptions tab, and click Add port.
3.
On the Add a Port dialog box, input the following information, and click
OK.
Name: Input any name for the port.
Port number: Input "137".
Protocol: Select TCP.
4.
Repeat steps 2 and 3.
On the Add a Port dialog box, input the same information as you did in step 3 except for
selecting UDP in Protocol.
5.
Repeat steps 2 to 4 to open the other ports (138TCP, 138UDP, 139TCP,
and 139UDP).
6.
Confirm that the port names are added on the Exceptions sheet, and
click OK.
Check 5: Change the workgroup name to "WORKGROUP" following the
procedure below.
Page 1121 of 1135 pagesCannot Access to the Card Slot Because of Some Security Settings on...
1121

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon PIXMA MG8100 series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Canon PIXMA MG8100 series

Canon PIXMA MG8100 series Bedienungsanleitung - Deutsch - 243 seiten

Canon PIXMA MG8100 series Bedienungsanleitung - Deutsch - 1206 seiten

Canon PIXMA MG8100 series Bedienungsanleitung - Holländisch - 1188 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info