Bedienungsanleitung Canon Pixma MP 750 Quickstart (Seite 1 von 2) (Englisch)

457305

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Start Here

Easy Setup Instructions

1 Unpack and install the machine.

Check the package contents.

• In this sheet, illustrations of MP780 are shown.

• A printer cable is not included. You must purchase a USB cable (less than 16 3/8 ft.) to connect your

machine to a computer.

2 Connect the telephone line. (MP780 model only)

Connect the telephone line and any necessary external device.

For details, see the Quick Start Guide.

3 Connect the power cord.

1 Connect the power cord.

1. Connect one end of the power cord to the rear of the machine.

2. Connect the other end to the AC outlet.

2 If the message <PUT IN CARTRIDGE> appears, go to Step 4, "Install the print

head."

4 Install the print head.

1 Press the Open Button to open the

Paper Output Tray. Then lift the

Scanning Unit until it locks into place.

IMPORTANT

Be sure to hold the Scanning Unit firmly with one

hand.

6 Lower the lock lever.

5 Install the ink tanks.

1 Prepare the ink tanks.

2 Insert the ink tanks.

3 Close the Inner Covers and the Scanning Unit.

6 Load the paper.

1 Open the Auto Sheet Feeder.

2 Load two sheets or more of letter-size plain paper.

7 Align the print head from the Operation Panel.

Be sure to align the print head to ensure print quality.

1 Press [OK] to start print head alignment.

If the printed pattern matches the illustration, print head alignment is complete.

You can change the language displayed on the LCD.

For details, see "Selecting The Language For The LCD" in the Quick Start Guide.

You have completed installation and alignment.

If you are connecting the machine to a computer for use, see the rear side of this sheet for

instructions on installing the software.

Thank you for purchasing the Canon PIXMA MP780/750. To prepare your machine for use, please follow these

Easy Setup Instructions before referring to any other documentation.

IMPORTANT

Do not connect the USB cable until after the software is installed. See the rear side of this sheet for details.

• Machine • Power cord

•Print head

• Telephone line

• Ink tanks

Black BCI-3eBK Black BCI-6BK

Cyan BCI-6C

Magenta BCI-6M

Yellow BCI-6Y

• Easy Setup Instructions • Quick Start Guide

• Setup CD-ROM

The Setup CD-ROM contains the MP Drivers, as well as the User's Guide, Software Guide and Photo

Application Guide in electronic format. Please read these guides.

2 Open the two Inner Covers. 3 Raise the lock lever.

4 Prepare the print head. 5 Insert the print head.

MP780

MP750

Connect external devices as follows:

External device jack

Telephone line jack

Telephone or answering machine

Built-in computer modem and telephone

Telephone

line

Telephone

line

Machine

Telephone or

answering machine

LINE TEL

Computer

Telephone

Connect the telephone

line cord to the wall jack.

You can connect an external

device (telephone or answering machine) if necessary.

Press the Open Button.

Lift the Scanning

Unit.

Pull

the Scanning

Unit Lever.

Click

(1) Open the two

Inner Covers.

(2) The Print Head Holder moves to the center.

(3) Install the print

head here.

Touch only the lock lever!

Raise this securely.

Do not touch!

Remove the protective cap and discard it.

(2) Push back.

(1) Insert.

Lower the lock lever

until you hear a click

as it locks into place.

Click

Remove the orange-colored

protective film. If it is not

removed completely,

problems with printing

may occur.

Remove the protective cap

and discard it.

Do not touch!

Push it in until locks

into place.

Click

Bad example: Tank 6BK is

not fully inserted.

Make sure to press it down

firmly.

Good example

Close the two Inner Covers.

Pull the Scanning Unit Lever

towards you to close the

Scanning Unit.

Click

IMPORTANT

Be sure to hold the Scanning Unit firmly with one hand.

(2) Pull out the Paper

Support until it stops.

Pinch and adjust

the paper guide

to the width of

the stack.

Load the paper with the print side face up.

Ensure the paper stack

does not exceed the paper limit mark.

(1) Open the Auto Sheet

Feeder.

(1) This message appears. (2) Press [OK].

If this message

does not appear

after closing the

Scanning Unit,

see "Aligning

The Print Head

Automatically"

in the Quick Start

Guide.

(3) The machine will print

the print head position

pattern and automatically

align the print head.

ALIGN PRINT HEAD

PRESS [OK]

All other products and brand names are registered trademarks or trademarks of their respective owners.

Specifications subject to change without notice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Pixma MP 750 Quickstart Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Pixma MP 750 Quickstart

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info