460512
95
Zoom out
Zoom in
Vorherige Seite
1/128
Nächste Seite
Chapter 10 93
Troubleshooting
Paper Curls/Ink Blots
Inappropriate paper type is used.
z Check to see if the paper you are printing on is too thick. See “General
Paper Guidelines” on page 16.
z Note that smudging may occur at the top and bottom edges of the
paper when using Borderless Printing. Ensure that the paper you are
using is compatible with Borderless Printing.
Thick paper is used. When printing on thick paper, set the Paper Thickness Lever to the right.
This widens the gap between the FINE Cartridge and the paper. Try this
maneuver if the printed surface is scratched.
Media is curled. If all four corners or the printing surface of the paper is curled, the paper
may become dirty or may not feed properly. Use the paper after correcting
paper curl as follows.
1. Place the printing surface face up (A), and cover it with a sheet of non-
printing regular paper to avoid damaging the surface.
2. Roll up the paper in the direction opposite to the paper curl as per the
figure below.
3. Check the printing paper to confirm if the paper curl is eliminated to
within approximately 2 to 5mm / 0.08 to 0.2 in (B).
It is recommended to print the curl-corrected paper one sheet at a time.
The media type is not selected
correctly in the printer driver.
On the [Main] tab of the printer driver, ensure that the [Media Type]
selected matches the paper loaded.
In the [Print] dialog box of the printer driver, select [Quality & Media] from
the pop-up menu, and then ensure that the [Media Type] selected matches
the paper loaded.
Paper is loaded incorrectly. Load in the portrait orientation regardless of the print direction of the
Auto Sheet Feeder.
Ensure that paper is loaded correctly. Slide the paper guides against the
paper stack.
Cause Action
Paper being used is too thin. Use Photo Paper Pro or other Canon genuine media to print images that
have a high color saturation. See “Paper Types You Cannot Use” on
page 16.
Cause Action
(A)
(A)
(B)
95

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

canon-pixma-mp180

Suche zurücksetzen

  • Patronen einsetzen linke Seite Farbpatronen,rechte Seite schwarze Patrone ? Eingereicht am 12-2-2022 11:23

    Antworten Frage melden
  • Beim starten Fehler 9000 wird immer angezeigt, obwohl ich auf Papierstau und Fremdwörter allesalles überprüft habe. Eingereicht am 25-5-2020 13:37

    Antworten Frage melden
  • Ich habe de printer ein paar mal an unf aus gemacht doch kommt immer fehlermeldung 5100 Eingereicht am 27-12-2019 15:08

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon Pixma MP180 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info