Bedienungsanleitung Canon Pixma MP450 (Seite 111 von 142) (Englisch)

532257

111

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

Chapter 11 109

Troubleshooting

Cannot Print Properly From The Digital Camera

The following are possible errors that may occur when printing directly from a digital still camera or

digital video camcorder*, and the countermeasures to eliminate them.

*Hereafter, digital still cameras and digital video camcorders are collectively called a digital camera

or camera.

Note

z PictBridge- or Canon Bubble Jet Direct-compatible digital cameras can be

connected to your machine for direct printing.

z This section describes errors that may be indicated on Canon-brand

PictBridge- or Bubble Jet Direct-compatible cameras. The error messages

and operations may vary depending on the camera you are using. If you are

using a non-Canon PictBridge-compatible camera and not sure how to clear

the printer error from the camera, confirm the message displayed on the LCD

of the machine and clear the error. For clearing errors from the machine, see

“An Error Message Is Displayed On The LCD” on page 99.

z A communication time out occurs if printing takes a long time or if it takes too

long to send the data. This may stop the printing. In such cases, disconnect

the cable between the machine and the camera, and reconnect the cable

between the machine and the camera. Then, turn the camera on, if it has not

automatically turned itself on. If the problem is still unresolved, select some

other photo and check if it can be printed or not.

z Your PictBridge-compatible device may need to be switched to printing mode

before it is connected to the machine, depending on the model of the device.

Also, it may need to be turned on manually or switched to replay mode after

being connected to the machine. Refer to the instruction manuals supplied

with your camera and take the necessary steps before connection.

z The FINE Cartridge nozzles may be clogged if printing becomes faint or the

colors are incorrect. See “When Printing Becomes Faint Or Color Is Incorrect”

on page 85.

z If the paper is curled or its surface is scratched during printing, make sure that

you are using the correct type of paper.

z For errors indicated on the camera and their solutions, also refer to the user’s

manual of the camera. For other problems associated with a digital camera,

contact the manufacturer of the camera.

Error message on camera Action

Printer in use/Printer warming up Photos are being printed from the computer.

Wait until printing ends. If the machine is warming up, wait until warm-up

ends.

No paper/Paper error Load paper in the Auto Sheet Feeder and press [OK] on the machine.

If the Paper Output Tray is closed, open it. Printing is resumed.

Paper jam Remove the jammed paper, load new paper, and press [OK] on the

machine and retry printing.

Printer cover open Close the Scanning Unit on the machine.

No print head The FINE Cartridge may not be installed properly, or the Cartridge may not

be the compatible with this machine. Install the appropriate FINE

Cartridge. If lines are misaligned or the resulting output is not satisfactory,

carry out the FINE Cartridge Alignment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Pixma MP450 Seite 111

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info