532257
115
Zoom out
Zoom in
Vorherige Seite
1/142
Nächste Seite
Chapter 11 113
Troubleshooting
Cannot Connect To PC Properly
Printing Speed Is Slow/USB 2.0 Hi-Speed Connection Does Not Work
When You Connect To A Computer Running Windows XP, The Screen
Shows The Warning Message “High-Speed USB Device Plugged Into
Non-High-Speed USB Hub”
The computer has an old version of
the software installed. (Canon
MultiPASS is registered as a
program in the [Start] menu.)
Uninstall the old version of the software following the instructions in the
manual of that version, and reinstall the new version.
Installation procedure not followed
correctly.
Follow the Easy Setup Instructions packaged with your machine for
proper MP driver installation.
If the MP driver was not installed correctly, uninstall the MP driver, and
restart your computer. Try to reinstall the MP driver.
If the installer was forcibly terminated due to an error, Windows may be
unstable. Remove the CD-ROM from the CD-ROM drive and restart your
computer.
Reinstall the MP driver.
Cause Action
Your environment is not fully
compatible with USB 2.0.
If your environment is not fully compatible with USB 2.0, the machine will
operate at the lower speed provided under USB 1.1. In this case, the
machine operates properly but printing speed may be slower due to the
communication speed.
Check the following to ensure that your Computer environment supports
USB 2.0 Hi-Speed connections.
z The USB port on your Computer supports USB 2.0 Hi-Speed
connection.
z Both the USB cable and USB hub support USB 2.0 Hi-Speed
connection.
Be sure to use a certified USB 2.0 Hi-Speed cable. You are recommended
to use a cable no longer than 3 meters.
z Your Computer supports the USB 2.0 Hi-Speed connection.
Obtain the latest version of the USB 2.0 Hi-Speed driver and install it on
your Computer.
z The USB 2.0 Hi-Speed driver operates properly.
Obtain the latest version of the USB 2.0 Hi-Speed driver and install it on
your Computer.
Cause Action
You connect to a computer that does
not support USB 2.0 Hi-Speed.
Your environment is not fully compatible with USB 2.0.
See “Printing Speed Is Slow/USB 2.0 Hi-Speed Connection Does Not
Work” on page 113.
Cause Action
115

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon Pixma MP450 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info