Bedienungsanleitung Canon PIXMA MX394 (Seite 72 von 108) (Englisch)

682487

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Memory Reception

If the machine was not able to print the received fax, the received fax is stored in the machine's memory.

The FAX Memory lamp is lit and Received in memory is displayed on the LCD.

Important

If the power plug is disconnected, all faxes stored in the machine's memory are deleted. The next

time you turn the machine on, press the OK button after a confirmation screen is displayed. The list of

the faxes deleted from the machine's memory (MEMORY CLEAR REPORT) will be printed.

If the machine receives a fax under one of the following conditions, the received fax will be automatically

stored in the machine's memory.

• The machine is set to store received faxes in its memory:

When Do not print is selected for Received documents in Auto print settings under Fax settings,

the received faxes are stored in the machine's memory.

You can print the faxes stored in the machine's memory from the Memory reference screen under

FAX menu.

Printing a Document in Machine's Memory

Note

To print the received faxes automatically, select Print for Received documents in Auto print

settings under Fax settings.

Auto print settings

•

An error has occurred on the machine:

If you select Print for Received documents in Auto print settings under Fax settings, a received

fax will be printed automatically. However, if any of the following errors occurs, the received fax will not

be printed. It will instead be stored in the machine's memory.

When the error is resolved, the fax stored in the machine's memory is printed automatically.

• The amount of remaining ink is insufficient to print a fax:

Replace the FINE cartridge.

Replacing a FINE Cartridge

Note

You can set the machine to forcibly print a received fax even if the ink has run out.

Set Print when no ink in Auto print settings under Fax settings to Print.

However, part or all of the fax may not be printed since the ink has run out.

Also, the contents of the fax will not be stored in the machine's memory.

If the ink has already run out, we recommend that Do not print be selected for Received

documents in Auto print settings under Fax settings to store the received fax in the

machine's memory. After you replace the FINE cartridge and select Print for Received

documents in Auto print settings, the fax stored in the machine's memory will be printed

automatically.

Auto print settings

•

Paper has run out:

Load the paper and press the OK button.

•

A different size of paper from that specified by Page size is loaded:

Load the same size of paper as that specified by Page size, then press the OK button.

•

Page size is set to other than A4, Letter, LTR, or Legal:

Set Page size to A4, Letter, LTR, or Legal.

Changing the Paper Settings

Note

Some of page sizes are not available depending on the country or region of purchase.

•

Media type is set to other than Plain paper:

Set Media type to Plain paper.

Changing the Paper Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon PIXMA MX394 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon PIXMA MX394

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info